So ...
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 1,294
Likes: 1
From: was: Palmdale, Ca
Car: was: 1984 Camaro Z28
Engine: was: L69
Transmission: was: 700-R4
So ...
... you want to jump out of a perfectly good airplane!
Well, I am going to start the inquiry. I checked the cost of this, it will be $200 roughly. There is a place by Elsinore where they teach you how to sky dive. There are some restrictions: You must be 18 years old and a maximum weight of 230 lbs. for tandem and 225 lbs. for AFF.
Sooo, who would be in!
Well, I am going to start the inquiry. I checked the cost of this, it will be $200 roughly. There is a place by Elsinore where they teach you how to sky dive. There are some restrictions: You must be 18 years old and a maximum weight of 230 lbs. for tandem and 225 lbs. for AFF.
Sooo, who would be in!
Member

Joined: Jul 2001
Posts: 370
Likes: 0
From: West Hills California USA
Car: Assorted
Engine: Various
Transmission: Manual and Automatic
No way George .... I work on them,and I wont even fly in them .... so jumping out of one is way out of my range LOL .... :rockon: :rockon: :rockon:
Supreme Member
Joined: Dec 2001
Posts: 2,862
Likes: 1
From: I won't tell either
Car: 1986 Grand Prix TPI
Engine: 350 TPI
Transmission: 200 4R
More than one pilot has told me "Why jump out of a perfectly good airplane?"
I can't think of one reason so count me out.
I can't think of one reason so count me out.
Trending Topics
Member
Joined: Dec 2001
Posts: 350
Likes: 0
From: SCV/Leona Valley, CA
Car: '83 T/A WS6
Engine: carbed 305
Transmission: 700R4 w/ shift kit
Although I do just make the min. age requirements of 18, I dont have a wish to die at 18!(Even if I did, I can think of several more fun ways to die than falling out of a perfectly good plane for "fun" then splating into the ground knowing theres nothing I can do, short of growing wings!) So sorry-plus my mom would never forgive you!
Member
Joined: Jul 1999
Posts: 163
Likes: 0
From: Bend, Oregon
Car: 89 IROC
Engine: Built 383, Vortech SC
Transmission: Pro-Built 700R4
Axle/Gears: Dana 44, True Trac, 3.54
No f***ing way. I'm chicken. I'll stick to 12 sec /110+ runs anyday. I turn 48 tommorrow and have all the thrills I can handle. Jeff
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
I would LOVE to sky-dive, but I have other things I need to spend the $200 on...
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 1,294
Likes: 1
From: was: Palmdale, Ca
Car: was: 1984 Camaro Z28
Engine: was: L69
Transmission: was: 700-R4
AGood2.8
I would love to try that, but ...
Are you certified? I used to know a guy that was certified to be an instructor, he had alot of hours on "his belt".
So, we only have three brave souls?
Come on, you only live once. :sillylol:
I would love to try that, but ...
Are you certified? I used to know a guy that was certified to be an instructor, he had alot of hours on "his belt".So, we only have three brave souls?
Come on, you only live once. :sillylol: Supreme Member

Joined: Dec 2001
Posts: 1,629
Likes: 0
From: Seattle, WA
Car: 2003 Porsche C4S
Engine: 3.6L
Transmission: 6-speed Manual
You know Kevin, in West Hollywood the rates are cheaper due to the competition, and if you cut it back to only once
or twice a week then you can save enough money to make the skydive, or at least that's what Madmax volunteered
or twice a week then you can save enough money to make the skydive, or at least that's what Madmax volunteered
Last edited by james_85Z28; Feb 17, 2003 at 03:32 PM.
Banned
Joined: Feb 2003
Posts: 1,455
Likes: 1
From: Mostly in water off So. Cal
Car: '87 Chev
Engine: 60*V6
Transmission: DY T700
Originally posted by MRZ28HO
AGood2.8
I would love to try that, but ...
Are you certified? I used to know a guy that was certified to be an instructor, he had alot of hours on "his belt".
AGood2.8
I would love to try that, but ...
Are you certified? I used to know a guy that was certified to be an instructor, he had alot of hours on "his belt". Kevin, I'm the guy that stopped by your dads shop on Sat in the truck and talked to you about the modules. You now know who I am
Dean a.k.a. AFGT
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Originally posted by ReddRocket
Plastic Surgery?
Plastic Surgery?

West Hollywood? Not even close. I go to Las Vegas.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
BumpaD82
Tech / General Engine
37
Feb 26, 2016 02:57 PM
383backinblack
Transmissions and Drivetrain
12
Oct 14, 2015 08:50 PM








ill have to pass on that one haha! 200 bucks could be a new rear end with disc breaks and 3.73 gears lol 