Alignment
Thread Starter
Supreme Member
Joined: Apr 2001
Posts: 1,715
Likes: 0
From: Stouffville, Ontario
Car: 83WS6TA
Engine: ZZ4
Transmission: TH350C
Axle/Gears: 3:23
Alignment
I've looked at a lot of posts on this and I'm going to try the following: -.7 camber each side, + 4.5 and +5.0 caster and 1/16 toe.
The car is an 83TA, with Prokit, Koni Yellows, Adjustable Panhard, Adjustable LCAs and LCA relo-brackets.
Also has 275/40/17 wheels and will be used for agressive street as well as lap days at a road race course.
So, will those caster settings be OK with the 17 inch rims or should I go more and is the toe setting about right for this application.
Thanx
The car is an 83TA, with Prokit, Koni Yellows, Adjustable Panhard, Adjustable LCAs and LCA relo-brackets.
Also has 275/40/17 wheels and will be used for agressive street as well as lap days at a road race course.
So, will those caster settings be OK with the 17 inch rims or should I go more and is the toe setting about right for this application.
Thanx
Thread
Thread Starter
Forum
Replies
Last Post