Do I need to change the Proportioning Valve
Thread Starter
Junior Member
Joined: May 2003
Posts: 3
Likes: 0
From: St. Paul, MN but temporaly in Hampton, VA
Do I need to change the Proportioning Valve
I have recently purchased a rear end out of a 95 camaro. It has 3.42 gears in it and it is a posi with disc brakes. I got the E-brake cables. I am trying to research the problem with the proportioning valve. I could not get the proportioning valve. Will my proportion valve work? Anybody used the drum brake proportioning valve? Is there anything I can get or do to make it work?
By the way I am swapping it in a 86 trans am with drum brakes.
By the way I am swapping it in a 86 trans am with drum brakes.
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Since you have an '86, you will need P/N 14089496.
Ed
Ed
Member
iTrader: (2)
Joined: Dec 2000
Posts: 222
Likes: 0
From: Central Indiana
Car: 1984 Camaro Z28
Engine: Blueprint 383
Transmission: T-5
Axle/Gears: 3.73
Hi,
I bought used Baer rear discs for my 84 3rd gen 10 bolt rear. Would I use the same proportioning valve part number above?
Thanks,
Craig
I bought used Baer rear discs for my 84 3rd gen 10 bolt rear. Would I use the same proportioning valve part number above?
Thanks,
Craig
Thread
Thread Starter
Forum
Replies
Last Post
