I've got c4 calipers...

Reply Subscribe

Thread Tools

Search this Thread

Sep 14, 2004 | 05:19 PM

WishIHadAZ

Thread Starter

Member

Joined: Jan 2003

Posts: 271

Likes: 0

From: northern va

Car: 87 iroc

Engine: L98 350

Transmission: 700R4

I've got c4 calipers...

My buddy replaced his brakes on his c4 and ended up giving me his old calipers (they aren't broken or anything he just wanted different ones). Obviously I will need different rotars but what else is needed to make these work on my camaro???

note : at this point I only have the fronts, but I will have rears too soon.

Sep 14, 2004 | 05:56 PM

ebmiller88

Supreme Member

iTrader: (7)

Joined: Mar 2001

Posts: 6,420

Likes: 5

From: Fort Mill, SC, USA

Car: '88 Iroc, '91 RS, and a '70 RS

Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag

Transmission: A4, A4, slated to be a T56

You'll need a lot of things to make them work: rotors, carriers, modded spindles, hubs, brackets, bolts, new pads, pad retaining pins, etc. Look at the following threads to see what's involved in a C4 swap. I wouldn't mess with his rear calipers...Vette rear calipers have no provisions for an e-brake like ours so you'd have to fab that up also.

https://www.thirdgen.org/techbb2/sho...hlight=upgrade

https://www.thirdgen.org/techbb2/sho...hlight=upgrade

Ed