will the kenny brown triangle strut brace bar fit a 1992 formula with the super ram installed? If not what about the 2 point from jegs or summit

 

As long as you don't have Polly engine mounts it should fit.
If you do have them, Anything will rub.

I used to run a Superram and had allot of trouble because had the mounts. They lift the engine about 1 to 1.5 inches.

 

yeah i have alot of clearance with my hotchkis and the superram however i had new rubber gm mounts. i've seen the troubles polly brings with the height.

 

so the hotchkis stb will clear the accel superram?

 

YEA

 

sweet thanks a million, i been puttin of buying one for awile now not knowing if it would fit!

 

The Hotchkiss fit on mine as well. I did add some 1/8th inch aluminum spacers under the base plates just for a little extra clearance, but it fits fine.

 

I don't understand why the poly mounts raise the engine more than new rubber ones would. I can understand that if you go from old beat rubber ones to poly you whould see a height change but why do they sit higher than rubber? Anyone have pic's of the poly mounts? I'm about to get one or the other and need to know soon. Thanks

 

they don't, i have energy suspension poly engine mounts and they are exactly the same as the stock ones except that they are made of polyurathane.

 

I put es polly mounts on mine and the kenny brown stb rubs on my stock tip intake now so i had to pull it off. Sorry dont have any pics.