Need some reassurance
Thread Starter
Member
iTrader: (1)
Joined: Feb 2005
Posts: 424
Likes: 0
From: Columbus, OH, USA
Car: '91 Z28, '13 Civic EX-L
Engine: 355 LT1, 1.8 I4
Transmission: T56, 5spd auto
Axle/Gears: 10 bolt 3.42(as long as no breaky)
Need some reassurance
I have a set of 9.5" x 18" c6 wheels for all 4 corners with 58mm offset.
My question is for spacers for the front wheels. I have the LS1 brakes, and i understand that spaces out the wheels roughly .3".
I have searched and have found people running a 9" wide wheel with roughly the same offset, to run 2" wheel spacers and be fine. Since my wheel is .5" wider, and im already an extra .3" out because of the brakes, a 2" spacer should still be ok for me right? Or would i be okay with a 1.7"?
My head is swimming right now as i dont want to pull the trigger on some spacers untill im sure of what i need.
My question is for spacers for the front wheels. I have the LS1 brakes, and i understand that spaces out the wheels roughly .3".
I have searched and have found people running a 9" wide wheel with roughly the same offset, to run 2" wheel spacers and be fine. Since my wheel is .5" wider, and im already an extra .3" out because of the brakes, a 2" spacer should still be ok for me right? Or would i be okay with a 1.7"?
My head is swimming right now as i dont want to pull the trigger on some spacers untill im sure of what i need.
Thread
Thread Starter
Forum
Replies
Last Post
BLOWN25TH
Auto Detailing and Appearance
4
Nov 5, 2003 08:49 PM