this is probably a silly question but

i know i have bad u-joints and im going to replace them next week but i was wondering can that reduce your 0-60 times or kill your take off the reason im asking is because it just doesnt seem to reach 0-60 as quick now the u-joints are bad.... thanks in advance...

if they are that bad, i would not even consider racing the car, its a fail waiting to happen.

They will definitely affect your 60, when they break, the car will stop.

yeah they have been bad for a while now...i dont know how bad they are but every single time im coasting to a stop i hear this clank and metal sound and when at a stop when im putting it in gear you also hear the metal clanking sound... its very annoying.. i know its the u joints.. i have neapco brute forces now and will put them on next week... but since then my 0 to 60 has taken a huge dip... because when i accelerate hard i get this nasty vibration underneath.. i still have the stock u joints on there... they are probably low on grease and being 21 plus years old its time for new stronger ones.... its not the tranny mount because i checked it and its fine....

Are you sure? I have never heard of u-joints doing that. Are you sure your torque arm bolts are tight? That's the only other thing I can think of that would make that noise in that situation.

could be..... i already purchased my torque arm with a bmr unit anyway and got a bmr torque arm relocation crossmember to get the torque arm off the tailshaft and onto the crossmemberand install the new u joints all at the same time... so whatever it is im sure it will be gone within a week anyway after i install everything...

either way man, stop driving it and fix it before something happens

i wish i could but sadly this is my daily driver... im going to baby it and will only have a week to put up with it until i install the parts... i've been driving it like this for at least two or three months...

Thanks for using our products for your project

If you have any questions or concerns during the install let me know I will be glad to help