I was considtering getting these since they are so cheap, but I've heard they are too low. Does anyone have opinions on these or how the car looks with them?

Thanks,
Matt

------------------
-----------------------
POWER AT THE COST OF BODY WORK...
1984 Camaro Z28 - Black w/ Grey int.
-GMPP 350 (72cc heads, 8.5:1 CR, & .390 intake/.410 exhaust cam) with Edelbrock 600 Carb, Edelbrock Preformer RPM intake, AC Delco plugs, 8mm AC Delco wires, 14" Accel filter, Edelbrock Chrome valve covers, breather, and Air cleaner.
- Profesionally Built Turbo-350 with 2500 RPM Stall converter, Hurst shifter, & one wicked shift kit.
- Eagle Alloys 15" Alum. Rims surrounded by P235/60R15 BF Goodrich Radial T/A's
-Comming Soon:
3.73's, MAC Cat-Back, hollowed cat., B&M Megashifter, & Paint: Navy Blue Metallic w/ Silver strips
Pics & more at: http://members.fbody.com/flashz28/

 

well, had bought them for my car and in lowered the car and the spring rates were lower, so the spring was not as stiff. The ties were about half an inch above the lip of the wheel well, and that was when I had just put them on. Needless to say I took them off that day and returned them for a refund.

 

ttt

------------------

 

I have them on my car and LOVE them. They are very stiff. I love the way my car looks and handles but it rides really rough. The spring rate is very stiff so I don't have to worry about bottoming out from the springs moving too much. I do have to worry about bottoming out because it is so low though. I don't have anyway of posting the picture so I'm mailing you a couple.