Perhapps I'm looking in the wrong places in my catalogs, or maybe just looking at the racing only ****. But does it usually cost over 300 dollars to upgrade my disc size? I want to replace my A arms with tubalar ones and I can't find any that are less than 800 bucks. Control arms 300 dollars, come one.

I keep hearing one of the most important and best mods is upgrading your supension. But who can afford it!

 

for the rear i used the following:

lakewood trailing arms #20140 $83.95
lakewood adjustable panhard rod #20440 $87.95
prices from summit.

as far as brakes go, yes it is expensive to upgrade. your replacing both calipers, rotors, bearings, sometimes hoses, and other miscellaneous pieces all at once.

 

what about the front? Control A arms, and such?

 

i don't know about them. the problem with lower control arms is they have to have a seat to hold the spring. if any company makes them, they are probably still the same weight. maybe marginally stronger.

 

So we can't get tublar control arms

 

If you want to convert to coil overs we can.....just look around, do a search and you will find lots.

 

The stuff is out there but again it's not going to be cheap. Very few manufacturers with very little demand equals a premium price.