Cam recomendations
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 81
Likes: 0
From: Okinawa, Japan
Cam recomendations
OK I think I'm keeping the TBI that or and LT1 anyways keeping the TBI engine will be Keith Black pistons flat tops, Scroggin Dickey vortec heads , Edelbrock performer or performer RPM kinda undecided any opinions on that one?? Holley 650 TBI with adapter obviously . any recomendations on a cam undecided on what to get hell i dont know
this will be street driven and raced probably not daily driven i'll have 3 cars maybe more bye then
with a speed behind it
this will be street driven and raced probably not daily driven i'll have 3 cars maybe more bye then
with a speed behind it
Last edited by Dex; Dec 24, 2002 at 10:53 PM.
Supreme Member
Joined: Sep 1999
Posts: 2,175
Likes: 0
From: Ewing, NJ
LT1 or LT4 stock cams can work pretty easily. if you wanna be a bit more aggressive and use the rpm intake you may wanna look into an LT4 Hot Cam or a ZZ4 cam. all will deliver a huge increase in power once tuned in preperly.
later
tim
later
tim
Supreme Member
Joined: Mar 2001
Posts: 5,144
Likes: 2
From: CC, TX
Car: 1999 Yamaha Banshee
Engine: 379cc twin cyl 2-stroke stroker
Transmission: 6 spd manual
Axle/Gears: 14/41 tooth
obviously with that setup you are gonna want custom tuning so i would NOT go with a cam as small as a LT1 or LT4 cam. i would go with a ZZ4 cam (sig 
) or a LT4 HOT cam
) or a LT4 HOT cam 
Thread
Thread Starter
Forum
Replies
Last Post