Edelbrock TBI to MPFI
Edelbrock TBI to MPFI
Hey, whats everyone's take on Edelbrock's TBI to MPFI setup?
http://www.edelbrock.com/automotive/mpfi_tbi_intro.html
No, I'm not considering it, but it seems interesting, and I'm sure there is more than one person here who may wish to at least look into it...
http://www.edelbrock.com/automotive/mpfi_tbi_intro.html
No, I'm not considering it, but it seems interesting, and I'm sure there is more than one person here who may wish to at least look into it...
i ahven't run it but i did se a truck that had teh conversion done. it looks liek a nice kit. it coudl most likely benefit from a litl emore air since with 8 injectors it has plenty of fuel capacity. the injectors it uses are also a little different. the kits uses pico style injectors instead of teh more common bosch style injectors. they work teh same, the body is just smaller.
later
tim
later
tim
Supreme Member
Joined: Dec 2001
Posts: 1,418
Likes: 1
From: Morris, IL
Car: '91 t-top RS; '91 hrdtp Z28
Engine: LO3;383tpi
Transmission: 700r4;very nice 700r4
Axle/Gears: 4.10 zt posi, 3.70 auburn
I'm pretty sure that system is made to work with the truck 7747 ecms. It would be cool if we could use it with the computer in our f-bodies. Though I don't think the $$ to power gain ratio is very good.
Last edited by r90camarors; Dec 25, 2002 at 04:51 PM.
Senior Member
Joined: Oct 1999
Posts: 6,621
Likes: 2
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
I've been tuning my friends 91 chevy 1500 pickup that has a zz4 and that edelbrock mpfi kit. It does use the 7747 but there isn't much different in the eprom. It's not a very simple setup, lots of issues with firing strategies (mostly when going between async and sync modes).
The truck was running really rich, failed emissions testing in NJ so that's when my friend had me tune it. Since then it's passed emissions and got 18mpg highway (which is darn good for a truck that size and 3.73 gears). I haven't gotten to tuning WOT performance but they don't really care. It's got a crappie tranny so they're thinking about pulling the motor and selling the mpfi kit. It really isn't worth the money! They could have done better with a 454tb.
The kit can work just as well with the f-body 8746 ecm just requires a few changes in the eprom, nothing difficult.
The truck was running really rich, failed emissions testing in NJ so that's when my friend had me tune it. Since then it's passed emissions and got 18mpg highway (which is darn good for a truck that size and 3.73 gears). I haven't gotten to tuning WOT performance but they don't really care. It's got a crappie tranny so they're thinking about pulling the motor and selling the mpfi kit. It really isn't worth the money! They could have done better with a 454tb.
The kit can work just as well with the f-body 8746 ecm just requires a few changes in the eprom, nothing difficult.
Last edited by JPrevost; Dec 26, 2002 at 10:18 PM.
Senior Member
Joined: May 2002
Posts: 813
Likes: 1
From: Summerville, SC
Car: 91 RS Camaro
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 2.73
I have come across this monster a time or two and wondered if injecting right into the runners is better than having a 4bbl TBI unit. What do you guys think?
Trending Topics
Guest
Posts: n/a
Re: Edelbrock TBI to MPFI
ttt.
Jprevost, I think you may be out of town or such, I see your last activity was April 25,08. Hopefully you see this. I am disperate for help and in a war with Edelbrock right now. I am filing a lawsuit on them if they do not respond with a solution by Wednesday. In the mean time I am driving around on expired tags since I can not get this vehicle to pass smog with the Calif smog legal conversion I bought from Edelbrock.
Dean
Jprevost, I think you may be out of town or such, I see your last activity was April 25,08. Hopefully you see this. I am disperate for help and in a war with Edelbrock right now. I am filing a lawsuit on them if they do not respond with a solution by Wednesday. In the mean time I am driving around on expired tags since I can not get this vehicle to pass smog with the Calif smog legal conversion I bought from Edelbrock.
Dean
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
Nov 10, 2015 04:07 PM
sreZ28
Engine/Drivetrain/Suspension Parts for Sale
5
Oct 22, 2015 08:21 AM
RABMAN
Interior Parts Wanted
2
Sep 18, 2015 09:02 PM






