On my 92 rs with the LO3 engine, will this adapter
(http://store.summitracing.com/partdetail.asp?part=27308)
from holley work with this intake mainfold from edelbrock
(http://store.summitracing.com/partde...3592&view=2047)?

I also need to know if it will fit under my stock hood and pass emisions...

thanks for any help!

 

I am looking at doing the same thing to my car, It looks like you got everything you need. As long as the manifold has EGR provisions you should be fine in passing emissions. As far as hood clearence is concerned I am not sure. From what I have read some have fit it and others have not. YOu might have to run a drop base air cleaner

 

thanks! Does anyone happen to know the stock intake manifold height?

 

I did some calculations a little while back on manifold deck height of the stock one vs. an aftermarket with the spacer...I will see if I can come up with them for ya. Sit tight and I will see what i can do.

 

here you go
https://www.thirdgen.org/techbb2/sho...ht=deck+height

although nobody replied to the post I am very confident that this approach will work well towards calculating if something will fit under the hood. Regardless I ended picking up the 300-64 intake, it has yet to go in, so I dont know 100% for sure if it will fit but I am confident that it will.....stay tuned for more details

 

Thank you! That is the exact information that I was looking for... now all I've got to do is check the specs on the Edelbrock manifold! :lala: