few questions about my LO5 Build
Thread Starter
Supreme Member
Joined: Mar 2001
Posts: 1,818
Likes: 0
From: Dixon, IL
Car: RS
Engine: 305
Transmission: 4L60
Axle/Gears: 3.42
few questions about my LO5 Build
its not really a build, because its already in the "thirdgen" (I own two TBIs, the one in question is about 4,600 lbs and has 4x4)
anyways, '91 LO5, I have a set of L98 heads sitting around as well as a .489 lift cam with around 216/217 duration. compression should be around 9.3-9.4, I already have an electric fan on it, and the other basics like OE, spacer, etc.
I put the combo in my desk top dyno and they said about 235 hp and 350 lbs. I think that is off, but oh well.
would you guys suggest anything else for OK hp, but GOOD tq? I'll need to turn 1 ton axles with 44" tires on it when it is done this summer.
anyways, '91 LO5, I have a set of L98 heads sitting around as well as a .489 lift cam with around 216/217 duration. compression should be around 9.3-9.4, I already have an electric fan on it, and the other basics like OE, spacer, etc.
I put the combo in my desk top dyno and they said about 235 hp and 350 lbs. I think that is off, but oh well.
would you guys suggest anything else for OK hp, but GOOD tq? I'll need to turn 1 ton axles with 44" tires on it when it is done this summer.
Thread
Thread Starter
Forum
Replies
Last Post
