and btw, they have to be cheaper than $12 a peice, I plan on buying about 15 pair.

Braswell has 2.25's for 12 a peice, and they want 15 to ship em, that comes up to 40 bucks for two blades.

Anybody else.
Thanks.



------------------
Dale Earnhardt, #3 has crossed the finish line with a victory.

IM: snflupigus | ICQ: 96787192

Snflupigus.com

Open Element Tech Article

ENGINE SPECS:
Stock Rating: 170bhp & 255ft-lbs
305 TBI,Open Element,K&N 14x3,Hypertech Stage I,454 GM TBI
Now Rating: A Little More

STEREO SPECS:
JVC Kalmeleon kdlx3,Infinity Kappa 2way 6x9's,PPI 4x6 Coaxials,PPI PC2400 AMP @ 2ohm
DEI Studio 12" 4ohm DVC,Custom Box:Exactly 1 Cubic Foot

 

Wouldn't the $15 for shipping for all 15 sets? I can't see them charging $15 for each set of two.

So $12 each is $24 plus $15 shipping divided by the number of sets they send you.

Anyways, you might want to look at the holley dominators parts. I recall when i was looking for 52's, that is where we got them from. Otherwise, a metal fab shop might be able to stamp a bunch out for you.

Mark.

 

Holy smokes, that's alot of money for two little round pieces of aluminum. For that price, I would just fab up a jig and make them myself.

 

i know i have to be able to buy them for cheaper than i can have them made.

well, yes, on the shipping, but when i talked to them, i was only going to buy 2 sets, and that was my shipping charge, and they would only ship them cod. wtf! their carbs are on every winston cup car on the track they claim, but they wont accept a credit card. sounds like they are stuck in the dark age. (from being around carbs all day long, hehehehehe) efi rules.

anyway, im not about to pay that much per set of blades anyway. im thinking they are worth at most 8 a peice, i would pay 8, but hope for near 3. seriously, where do these guys who build the 58mm tpi throttle bodies get their butterflies?

thanks

 

anybody? please, its kind of urgent. thanks.

 

Nobody 'builds' 58mm throttle bodys, they are all new castings.

The 52mm are the remanufactured ones (or new also)

 

thanks, but i still dont have a source for buying 58mm butterflies.

 

btt

 

this is my last try,

nobody knows where i could get them huh?

------------------
Dale Earnhardt, #3 has crossed the finish line with a victory.

IM: snflupigus | ICQ: 96787192

Snflupigus.com

Open Element Tech Article

ENGINE SPECS:
Stock Rating: 170bhp & 255ft-lbs
305 TBI,Open Element,K&N 14x3,Hypertech Stage I,454 GM TBI
Now Rating: A Little More

STEREO SPECS:
JVC Kalmeleon kdlx3,Infinity Kappa 2way 6x9's,PPI 4x6 Coaxials,PPI PC2400 AMP @ 2ohm
DEI Studio 12" 4ohm DVC,Custom Box:Exactly 1 Cubic Foot

 

Sorry I don't have an answer for ya but are they for the Throttle Bodies that you are working on. Are you still planning on selling them?

------------------
87 C-10
305 TBI
(yeah I know its a truck, but you are the best TBI guys I have found)
Performance
**Somewhere around a 17.0 @ 85 ish (G-Tech)
*Freshly rebuilt 305 bored +0.030 over (311)
*K&N Airfilter
*Homemade Ramair w/ modified intake
*180 thermostat
*Custom True dual exhaust(Flowmaster 40's)No Cat's
*TD Performance TBI Spacer
*Mobil 1 10-w30
*Redline Water Wetter
**(alot more done, but I don't feel like boring everybody)

 

Your local insect shop has some really awesome 58mm butterflies for a few cents. Or you may be able to catch one with a net at no charge. Good luck.

 

yes, for one of my tbis. i want to make one for a guy, with a supercharged 454 so he can test a mamothly large tbi unit such as that for me. in all seriousness, that is huge-er than huge.

 

Hey Snuf, why don't you hook me up with one for my 383 too?? Looking to run something with the IAC in it if at all possible...

Steve

------------------
Steve's Trans Am Temple

 

hook up would equal almost $300. just to let you know. these things arent cheap to make, but it would come with an iac. it would be a base with an iac, blades, shaft, and linkage.