1/8 mile times!!!
1/8 mile times!!!
What would be a good 1/8 mile time for my car (just flowmaster and 14x3 open element). Also, what are u LO3 guys running.
------------------
1988 305 TBI camaro. Flowmaster exhaust, 14x3 open air element, complete IROC-Z makeover (stripes, ground effects, interior...etc), Kenwood c.d. player, Sony Xplod 6x9's, Blaupunkt 3 1/2's.
------------------
1988 305 TBI camaro. Flowmaster exhaust, 14x3 open air element, complete IROC-Z makeover (stripes, ground effects, interior...etc), Kenwood c.d. player, Sony Xplod 6x9's, Blaupunkt 3 1/2's.
With only a Flowmaster and open element, I'd say about 10.5.
------------------
1992 Camaro RS (Auto) 5.0L TBI
-
Performance mods
NOS (125 HP shot), Dynomax cat-back exhaust, Hedman headers, K & N open element/ X-Stream lid, MSD 6A ignition, MSD 8.5mm plug wires, LT1 camshaft
Soon to be installed:
Performance intake manifold, B & M 2400 RPM stall torque converter, Trans Go shift kit, World Products Torquer heads, Ed Wright Fast Chip
Audio
Sony Xplod CDX-M610 head unit, Pioneer 2-way 4x6 front speakers, Pioneer 3-way 6x9 rear speakers, 12 inch Pioneer VCCS PRO subwoofer, QLogic sealed box, Kicker ZR360 amplifier, Lightning Audio 1 farad capacitor
Other
Macewen White Faced Gauges/Shift overlay, A-pillar gauges (Phantom oil pressure, Air/Fuel), 180* thermostat, Window Tint, chrome valve covers, xenon headlights
------------------
1992 Camaro RS (Auto) 5.0L TBI
-
Performance mods
NOS (125 HP shot), Dynomax cat-back exhaust, Hedman headers, K & N open element/ X-Stream lid, MSD 6A ignition, MSD 8.5mm plug wires, LT1 camshaft
Soon to be installed:
Performance intake manifold, B & M 2400 RPM stall torque converter, Trans Go shift kit, World Products Torquer heads, Ed Wright Fast Chip
Audio
Sony Xplod CDX-M610 head unit, Pioneer 2-way 4x6 front speakers, Pioneer 3-way 6x9 rear speakers, 12 inch Pioneer VCCS PRO subwoofer, QLogic sealed box, Kicker ZR360 amplifier, Lightning Audio 1 farad capacitor
Other
Macewen White Faced Gauges/Shift overlay, A-pillar gauges (Phantom oil pressure, Air/Fuel), 180* thermostat, Window Tint, chrome valve covers, xenon headlights
Senior Member
Joined: Mar 2001
Posts: 868
Likes: 0
From: Randleman,NC,USA
Car: 91 Camaro RS Convertible
Engine: 385ci LT1 cnc ported heads big cam
Transmission: 4L60E automatic
Axle/Gears: 3.42 Zexel posi 7.5" rear
It could be an 11 second car if its still a 2.73 open rear and an auto.
Supreme Member
Joined: Jul 1999
Posts: 1,431
Likes: 1
From: Huntsville, AL
Car: '00 Chevrolet Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
I've never been to the track with my car, but a friend of mine has a '92 RS, 305 TBI, auto, with open element, headers, and Borla cat-back. He runs right around 10.0 every time (give or take a .1). That's not too far off from yours, I'd guess 10.3-10.7.
-Mark W.
'88 SC Camaro w/ 305 TBI
-Mark W.
'88 SC Camaro w/ 305 TBI
my times in the 1/8th are an average of 10.2@69 mph,with 2.28-2.31 60 footers.look in sig for mods.
------------------
-1991 camaro rs,dark red metallic,t-tops,stock 15inch rims,Z28 bowtie grille insert with driving lights
-L03 305,TH700R4,2.73's,only mods for now are...Flowmaster 80 series replacement muffler,accel wires and coil,14x3 open element with K&N,lockup switch at the track,and a catco cat.
-best 1/4 mile times to date:15.89@86 with a 2.26 60 ft
------------------
-1991 camaro rs,dark red metallic,t-tops,stock 15inch rims,Z28 bowtie grille insert with driving lights
-L03 305,TH700R4,2.73's,only mods for now are...Flowmaster 80 series replacement muffler,accel wires and coil,14x3 open element with K&N,lockup switch at the track,and a catco cat.
-best 1/4 mile times to date:15.89@86 with a 2.26 60 ft
in sig
------------------
92 Camaro 305 TBI Automatic
2.5 high flow cat, 2.5 pipes, 3.5in tip
shift kit(Rebuilt Tranny)
Tinted windows(legal)
Spark plug wires and plugs...
14X3 O.E. K&N Filter
Edelbrock TES 1 3/4" Headers
Future mods?
any other advise on getting to 300+ HP would be appreciated. Thanks
11.0 Et @64mph on the 1/8 reaction time was 1.0+ with a 60ft at 2.5?(First run ever, didn't know which light to go on)
---------
System = Sony explode 5000 CD/MD receiver
Rockford 6x9 Fanatics
Rockford 4x6 Fanatics
Rockford 2 12" Hx2's
Rockford 1 farad cap
Rockford 800x2 Amp
Custom box
4gauge wire kit
https://www.thirdgen.org/rides/index.tgo?action=view&rideid=6100
------------------
92 Camaro 305 TBI Automatic
2.5 high flow cat, 2.5 pipes, 3.5in tip
shift kit(Rebuilt Tranny)
Tinted windows(legal)
Spark plug wires and plugs...
14X3 O.E. K&N Filter
Edelbrock TES 1 3/4" Headers
Future mods?
any other advise on getting to 300+ HP would be appreciated. Thanks
11.0 Et @64mph on the 1/8 reaction time was 1.0+ with a 60ft at 2.5?(First run ever, didn't know which light to go on)

---------
System = Sony explode 5000 CD/MD receiver
Rockford 6x9 Fanatics
Rockford 4x6 Fanatics
Rockford 2 12" Hx2's
Rockford 1 farad cap
Rockford 800x2 Amp
Custom box
4gauge wire kit
https://www.thirdgen.org/rides/index.tgo?action=view&rideid=6100
Trending Topics
1/8 9.72@73.79 mods below
------------------
Trans Go Kit
Hooker Areochamber 3in Cat-Back (Gutted Cat)
Hypertech Chip (Street Runner)
Cowl Induction Hood
Under Drive Pulleys
Open Element Air Filter
1/2 In TBI Spacer and
TBI Injector Spacer
Best E/T 15.170 @ 89.82
------------------
Trans Go Kit
Hooker Areochamber 3in Cat-Back (Gutted Cat)
Hypertech Chip (Street Runner)
Cowl Induction Hood
Under Drive Pulleys
Open Element Air Filter
1/2 In TBI Spacer and
TBI Injector Spacer
Best E/T 15.170 @ 89.82
Thread
Thread Starter
Forum
Replies
Last Post





