I tried for a while on an extra 700R-4 my buddy has. That dang thing just won't come out. I got the big snap ring dealy out, and cover comes out about 1/8" and then won't go any further. I want to know how this thing comes out before I go force mine and break something.

------------------
'92 Astro, GM crate 350, Holley Pro-Jection Intake, MSD 6AL, 3.42's, 2.5" exhaust, Flowmaster 40 2 chamber, B&M 2nd stage shift kit, 255 60 R15 tires on AR-727's, Polished & Bored TBI, Custom EPROM in progress

 

how long is it going to take to have this moved to the transmission board?

 

this long. moved

 

Use an awl and stick it into one of the two "slots" around the edge of the bore and pry out the rubber o-ring. Then snip the o-ring and pull it out. The servo cover should pop right out after that. Obviously that destroys the o-ring, but you were gonna replace it anyway, right?

 

Thanks for the answer. I asked on this board because it's the only one I get decent responses at. All the others and I get OPINIONS, well opinions aren't gonna get the servo cover off. That's all