crossfire renegade intake manifold?
#51
Member
Re: crossfire renegade intake manifold?
Thanks. We do have some things in stock depending on what people are looking for. PM me if you have something in mind, we may have it.
#52
Senior Member
iTrader: (2)
Join Date: Sep 2002
Location: Denver, CO
Posts: 518
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1982 Camaro Pace Car
Engine: LU5 Crossfire
Transmission: Auto
Re: crossfire renegade intake manifold?
Hope you can bring the business back Tom. Would definitely like to get my hands on the TB balancing tool and some other tools you previously had for sale.
#53
Member
#55
Member
#57
Member
#60
Member
Re: crossfire renegade intake manifold?
Summit does sell it now along with others.
Not that I'm aware of...I did approached Edlebrock and began talks with them to manufacture the manifold, but they said it was too complicated and time consuming of a tool "mold" to produce. Oh, well, it's not that bad really so Eddy Motorsports makes it for us. Hope this helps
#62
Member
Re: crossfire renegade intake manifold?
A well over due update...
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
#63
Junior Member
Re: crossfire renegade intake manifold?
A well over due update...
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
#65
Member
Re: crossfire renegade intake manifold?
Getting closer...check your PM inbox.
#68
Re: crossfire renegade intake manifold? I am very interested in your new website
A well over due update...
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
A new CFI company will appear on the Interwebs soon. Give me another week or two to finish the site. Waiting on some more parts, so I'm kind of at the mercy of other vendors at the moment. The new site is actually already online, but it says it's under construction, which it is. I'll be starting out small on the amount of items and add items as time goes on with "maybe" a few new items added again over time that have never been seen by anyone except myself nor sold by DCS or anybody else. I'm meeting with a pattern maker tomorrow to see the feasibility and the cost of some new tooling (molds) to be cast. Curious? I guess you will have to wait and see. PM me if you want info on site. Thanks All.
#71
Member
#72
Member
iTrader: (2)
Join Date: Jun 2006
Location: Dallas, TX
Posts: 181
Likes: 0
Received 4 Likes
on
3 Posts
Car: 1982 Z-28
Engine: 5.7L Crossfire
Transmission: TH-350
Axle/Gears: GM Posi, 3.73
Re: crossfire renegade intake manifold?
Dang!! I already bought most of the parts currently on the site.
Last edited by gheatly; 09-19-2019 at 07:54 PM.
#73
Member
Re: crossfire renegade intake manifold?
LOL, thanks, but there is more stuff coming. It just takes a crazy amount of time though to get things done.
#74
Member
Re: crossfire renegade intake manifold?
Just to let members know, there is now a Renegade manifold top plate gasket available at 1/32" thick specifically for the Renegade. There has never been a gasket offered until now. No price yet, but it is on the site to view. Price should be soon. Also, I added custom TB fittings for a parallel plumbed system using AN-6 fittings. The new blank off plates are on there as well with gaskets, not to mention that the NEW HAM board is now available. It is now a purple board with all gold connections vs. silver on the old board with some improvements to make installation easier. More to come somewhat soon. Any other questions feel free to PM me.
The following users liked this post:
Doppelganger (10-16-2019)
#75
Supreme Member
iTrader: (3)
Re: crossfire renegade intake manifold?
Just to let members know, there is now a Renegade manifold top plate gasket available at 1/32" thick specifically for the Renegade. There has never been a gasket offered until now. No price yet, but it is on the site to view. Price should be soon. Also, I added custom TB fittings for a parallel plumbed system using AN-6 fittings. The new blank off plates are on there as well with gaskets, not to mention that the NEW HAM board is now available. It is now a purple board with all gold connections vs. silver on the old board with some improvements to make installation easier. More to come somewhat soon. Any other questions feel free to PM me.
#77
Supreme Member
iTrader: (3)
#78
Member
Re: crossfire renegade intake manifold?
Like he said...
#79
Member
Re: crossfire renegade intake manifold?
Still pursuing the raw manifold casting project and have been rather busy. Getting a little push back on this from CA company. Oh well, it's 50% my tooling. If they **** me off too much I will see about pulling the tooling completely. Posted up new items on the site, like top plate gaskets and other things.
#80
Member
Re: crossfire renegade intake manifold?
It looks like the tooling for the manifold is going to be pulled from Eddy Motorsports. I have a call tonight to discuss the destiny of the manifold. Worse case, it will never be produced again.
#82
Member
Re: crossfire renegade intake manifold?
The tooling will be removed and inspected from EMS on Dec 13th when we take a road trip to CA.
#83
Member
#84
Member
Re: crossfire renegade intake manifold?
Just to let all you CF guys know...The tooling for the Renegade manifold is now back in my hands safe and sound. EMS is NO LONGER making them or selling them. There are some issues, but it doesn't look bad or unrepairable. All the core boxes look good for sure. Just the cope and drags are the issue so far. Even the top plate looks good and that is one piece that I was worried about. We are going to look it over a little more tomorrow and the next few days and also get with the pattern maker in Phoenix that originally did the tooling and see what he says.I have to get with our original machinist and tell him that he may be back in the manifold business again.
Also, we may have found another promising new foundry...AND ITS LOCAL! That would be HUGE if everything looks and goes as planned IMO. Need to contact Summit as well before we lose that connection because of EMS. There is a lot to do and since the holiday is coming, it will set things back a little, BUT at least all the tooling is back to us and I'm a happy camper right now.
Here are the core boxes, they are all in good shape...thank God! I talked with my machinist today and we discussed the manifold machining and kind of what I want to do if this all works out as planned and he is all for it including the "blue printed" version/plan and ready to go.
Also, we may have found another promising new foundry...AND ITS LOCAL! That would be HUGE if everything looks and goes as planned IMO. Need to contact Summit as well before we lose that connection because of EMS. There is a lot to do and since the holiday is coming, it will set things back a little, BUT at least all the tooling is back to us and I'm a happy camper right now.
Here are the core boxes, they are all in good shape...thank God! I talked with my machinist today and we discussed the manifold machining and kind of what I want to do if this all works out as planned and he is all for it including the "blue printed" version/plan and ready to go.
The following users liked this post:
jstadmud (01-15-2020)
#85
Supreme Member
iTrader: (3)
Re: crossfire renegade intake manifold?
Just to let all you CF guys know...The tooling for the Renegade manifold is now back in my hands safe and sound. EMS is NO LONGER making them or selling them. There are some issues, but it doesn't look bad or unrepairable. All the core boxes look good for sure. Just the cope and drags are the issue so far. Even the top plate looks good and that is one piece that I was worried about. We are going to look it over a little more tomorrow and the next few days and also get with the pattern maker in Phoenix that originally did the tooling and see what he says.I have to get with our original machinist and tell him that he may be back in the manifold business again.
Also, we may have found another promising new foundry...AND ITS LOCAL! That would be HUGE if everything looks and goes as planned IMO. Need to contact Summit as well before we lose that connection because of EMS. There is a lot to do and since the holiday is coming, it will set things back a little, BUT at least all the tooling is back to us and I'm a happy camper right now.
Here are the core boxes, they are all in good shape...thank God! I talked with my machinist today and we discussed the manifold machining and kind of what I want to do if this all works out as planned and he is all for it including the "blue printed" version/plan and ready to go.
Also, we may have found another promising new foundry...AND ITS LOCAL! That would be HUGE if everything looks and goes as planned IMO. Need to contact Summit as well before we lose that connection because of EMS. There is a lot to do and since the holiday is coming, it will set things back a little, BUT at least all the tooling is back to us and I'm a happy camper right now.
Here are the core boxes, they are all in good shape...thank God! I talked with my machinist today and we discussed the manifold machining and kind of what I want to do if this all works out as planned and he is all for it including the "blue printed" version/plan and ready to go.
#86
Junior Member
Re: crossfire renegade intake manifold?
Any updates on how things are coming along? I'm really looking forward to building up my CrossFire engine!
#87
Member
Re: crossfire renegade intake manifold?
Not much to report right now. I have talked with the original pattern maker about the tooling and I need to drop it all off and have him take a look at it. When that happens, I will post an update of the next move. Thanks for posting.
#88
Junior Member
Re: crossfire renegade intake manifold?
Awesome! Hope everything goes according to plan
#90
Junior Member
Re: crossfire renegade intake manifold?
I just saw that all items have been removed from xfireperformance.com website and it says its shutting down?? Does anyone here have any info? Is this to be the end of the Renegade CrossFire intake?
#91
TGO Supporter
iTrader: (1)
Re: crossfire renegade intake manifold?
An inexpensive alternative to the CF manifold is a single plane weiand(spell?) accelerator with adapter plate to a 7.4L TB. Or a edelbrock torker with same. Those are low profile manifolds that may clear a hood. I ran similar but the TBI Holley dual plane manifold.
#92
#93
Junior Member
Re: crossfire renegade intake manifold?
I copied the pages below from the Xfire website........
#96
Member
Re: crossfire renegade intake manifold?
Notice... If anyone was interested, I did open one item for sales, the HAM board.
#97
Member
Re: crossfire renegade intake manifold?
UPDATE: The Renegade tooling is done and as good as new again. I will be picking it up either Monday or Tues from the pattern maker. Now, I need to go to the foundry and see what I can work out with them if anything. More as this story as it develops. Now if I can only get this virus thing to stop. What a mess...
#99
Member
Re: crossfire renegade intake manifold?
You have asked this several times now. That would appear to be a machining issue, not a tooling issue. Since I don't have or ever had a F-body car and you have not given me any information regarding this issue in the way of bolt dimensions, thread size/pitch, length and most importantly "exactly" where the hole needs to be, the short answer would be no.
#100
Member
Re: crossfire renegade intake manifold?
UPDATE: I picked up the Renegade tooling today from the pattern maker. It all looks nice and just like brand new again and ready for pouring. On to the next step... I will be going to the foundry in the morning with the tooling to see if I can get them to do some pours.
Last edited by Buccaneer; 05-07-2020 at 01:24 AM.