Swapped my 3.1 for a 350 tbi
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 91
Likes: 1
From: Austin, Texas
Car: 91 Camaro R/S
Engine: Tbi 350
Transmission: auto4
Axle/Gears: Stock
Swapped my 3.1 for a 350 tbi
Okay first question, when I did my swap I used a truck harness from a 90' chevy truck, and I used a ECM that was given to me that came out of a 91 Camaro 305 tbi. Will they work together?
Now if the answer is no then that will answer the rest on my questions hopefully!
I have no power going to my fuel pump or the injector wires,
But I have power at the fuel pump fuse, relay and the inj.1 inj.2 fuses.
And I have no power going to the ALDL connector.
Any ideas?
Now if the answer is no then that will answer the rest on my questions hopefully!
I have no power going to my fuel pump or the injector wires,
But I have power at the fuel pump fuse, relay and the inj.1 inj.2 fuses.
And I have no power going to the ALDL connector.
Any ideas?
Last edited by curtalert89; Jan 15, 2014 at 08:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post