running rough
Ray,
Make sure the intake tract is sealed so that the MAF senses all incoming air. Check the 'O' ring seal under the MAP sensor (mounted to the top of the plenum on the right side). Clean the throttle body and IAC air passages. Check the temperature sensor resistance reading at a known temperature.
Make sure the intake tract is sealed so that the MAF senses all incoming air. Check the 'O' ring seal under the MAP sensor (mounted to the top of the plenum on the right side). Clean the throttle body and IAC air passages. Check the temperature sensor resistance reading at a known temperature.
Thread
Thread Starter
Forum
Replies
Last Post








