cam selection
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 751
Likes: 0
From: Walla Walla Washington
cam selection
what cam specs should I look at for my 1987 305H with a roller cam for performance and not one that would lope me out of my seat its all stock still and I plan to keep the quadrjet ccc carb
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
This has got to be one of the most commonly asked questions on this board, right next to the same question about a L03. Here's a link to a handful of recent replies.
https://www.thirdgen.org/techbb2/sho...hreadid=116118
You won't see much from a cam until you fix the exhaust. Kind of like, you can't fix constipation by eating more. But when you are ready, I'd sugget the Comp 08-300-8, which is also known as a 262HR-12. Your 87 has the roller setup. Be sure to replace the valve springs and all their hardware at the same time (get the kit from Comp).
https://www.thirdgen.org/techbb2/sho...hreadid=116118
You won't see much from a cam until you fix the exhaust. Kind of like, you can't fix constipation by eating more. But when you are ready, I'd sugget the Comp 08-300-8, which is also known as a 262HR-12. Your 87 has the roller setup. Be sure to replace the valve springs and all their hardware at the same time (get the kit from Comp).
Thread
Thread Starter
Forum
Replies
Last Post