I'm looking at Centerlines....what is the bolt pattern and backspacing for my car? will these fit......I know wrong board, move it if you wish.

CLL-075104547 15 in. x 10 in., 5 x 4 3/4 in. bolt circle, 4 1/2 in. backspacing, polished, Warrior wheel

 

anyone please I need to order!

 

15x8in. with 5in. backspace will fit with a 295/50/15. A 15x8 with 5 1/2 will also work with a factory spacer. A 10in. wheel will definitely stick out of the fender. A 5in. backspace will work also on the 10in. wheel.

 

you think they would be out too far with 4.5 back spacing? My friend runs 10's and they are about 1 inch past the fender wells.

 

I just put 16x8 Centerlines with 245/50's but I don't remember what the backspacing was. Sorry, guess that isn't much help. But here is what they looked like.

 

those are the wheels I decided on also! I want 10's on the back and 8's on the front. I think we better not park too close we may mix up our cars..

 

I grew up in Baker City OR.

 

I want to see a picture of the 10's when you get them. That should look nice
I'll give you another look at them.

 

Ill take a pic and post it...Very nice car you have there! Thanks for your help.

 

Whats the biggest rim we can fit on our cars. I have a GTA but im sure its real similar to the camaros. I was thinking about 15x12s but I dont want to scrape the fender also taking into consideration bumps. What do you guys think? How big of a tire can I get? I want the Mickey Thompson street slicks.

 

I have the warrior rims 15X9.5 With 4.5in backspacing. My quick time pro's are flush with the wheel well lip. I don't know how good of pictures I have on my website, but they are on the car.
Later
Spud

 

I had the Centerline AutoDrag 15x10 with 4 7/8 and 275/50r15 tires. The tread was inside the wheel well but the tire bulge stuck out just a little. Nothing redneckish though. 4.5 would stick them out even further.