How about this combo?
Thread Starter
Member
Joined: Nov 2002
Posts: 211
Likes: 0
From: Phoenix, AZ
Car: 1991 Z28
Engine: L98
How about this combo?
What do you guys think of this combo...
355ci, stock cast crank, stock rods, KB dished pistons yielding 9.8cr
vortec heads w/5 angle valve job
sdpc tpi base, stock runners(for now)
LPE hyd. flat tappet cam 224/234 duration .496/.520 w/1.6 rockers and matching valve springs
24# injectors, holley afpr, custom chip.
I decided a retro-fit roller cam just wasn't worth the money.
What kind of hp/tq numbers would you expect to see from this combo? Any suggestions?
355ci, stock cast crank, stock rods, KB dished pistons yielding 9.8cr
vortec heads w/5 angle valve job
sdpc tpi base, stock runners(for now)
LPE hyd. flat tappet cam 224/234 duration .496/.520 w/1.6 rockers and matching valve springs
24# injectors, holley afpr, custom chip.
I decided a retro-fit roller cam just wasn't worth the money.
What kind of hp/tq numbers would you expect to see from this combo? Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
roysatikas
Transmissions and Drivetrain
0
Sep 22, 2015 08:15 PM