Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Need info for a 68 camaro with strait 6......

Thread Tools
 
Search this Thread
 
Old Dec 6, 2002 | 06:18 PM
  #1  
N8Miller's Avatar
Thread Starter
Member
 
Joined: Dec 2001
Posts: 155
Likes: 0
From: PA
Need info for a 68 camaro with strait 6......

hey guys.........
i know that this isnt the best place to post this, but there is no "general chat" forum.

anyway, my buddy has got some money burning a hole in his pocket and wants a car of his own (tired of being moms little baby anymore), so he wants a 68 camaro wtih a strait 6. i know nadda about this car. can anyone give me some idea of what they are like, power, etc etc
also, i guess its a 3spd auto-----how are they on the highway???

thanks
Reply
Old Dec 6, 2002 | 07:06 PM
  #2  
SoCo80p's Avatar
Supreme Member
iTrader: (5)
 
Joined: Oct 2001
Posts: 1,063
Likes: 0
From: Illinois
i would not get the car persoanlly. it will have most likely a 2-speed powerglide trans and 2.56 gear. the engines had probley about 150. and are **** slow probley 19's on a good day (seriously) there good for cruzin on the highway but other then that there dogs and have no performance aftermarket.
Reply
Old Dec 6, 2002 | 07:24 PM
  #3  
84TAProject's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 637
Likes: 0
From: Connecticut
My father's 67 with a 454 was once a 2 speed powerglide with a straight six and 3.36 rear gears. he claims my 2.8 would destroy it. And that thing is a pig.
Reply
Old Dec 7, 2002 | 12:15 AM
  #4  
Black 91 Z28's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 571
Likes: 0
From: Starkville, MS
Car: 1991 Camaro Z28
Engine: 350
Transmission: 700R4
Hey.

You're either looking at 140HP or 155HP depending on which 6 it is.

Unless, he has a bunch of money burning a whole in his pocket, where he could buy a better engine to put it, I'd say pass as well.

David
Reply
Old Dec 7, 2002 | 12:22 AM
  #5  
devianb's Avatar
Supreme Member
20 Year Member
 
Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
a 68 Camaro w/ a straight six is like a SC with a 2.8l. I say pass too, unless you can get it for free or something.


If the Camaro had a great body, I would buy it and put in a big block, probably a 454 or something.
Reply
Old Dec 7, 2002 | 10:28 AM
  #6  
MdFormula350's Avatar
TGO Supporter
 
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
i would pass.
Reply
Old Dec 8, 2002 | 07:46 PM
  #7  
Abel Kane's Avatar
Senior Member
 
Joined: Sep 2001
Posts: 747
Likes: 0
From: USA
Car: 1981 Oldsmobile Cutlass Supreme Brougham 2dr Coupe
Engine: 403 Olds v8, bored .030 over
Transmission: 350 T.H. 3A, shift kit
Regardless of the engine being not so powerful, it's still a classic.
No aftermarket? Clifford intdustries, I believe, would disagree. You could get "split headers and have true dual exhaust. You could get a pretty good cam from Blue Racer/Wolverine. A 4bbl intake from Offenhauser...
True it will never be a 454. The question is, what do you want? I would modifly the 250.
Reply
Old Dec 8, 2002 | 07:55 PM
  #8  
85_ZED28's Avatar
Supreme Member
 
Joined: Jan 2001
Posts: 2,412
Likes: 0
From: St Catharines, ON
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
i would much rather drive a 6cyl '68 Camaro around then my mom's 92 Cutless
Reply
Old Dec 8, 2002 | 11:23 PM
  #9  
wyldbillracer's Avatar
Junior Member
 
Joined: Oct 2002
Posts: 50
Likes: 0
From: birmingham/dora, alabama
I worked on a 68 camaro,installed a new cam and duel weber carbs,split exaust manifolds, it was not the fastest thing around but it wins a lot of car shows for being original. also did'nt sound too bad. the body was perfect. Also have done mods on a 53 chevy pickup...it is for sale at this time, it has the same mods as the camaro but it has a 235 I-6...here is a link to the ad
http://adcache.collectorcartraderonl...6/34939136.htm
Reply
Old Dec 9, 2002 | 12:43 AM
  #10  
AlkyIROC's Avatar
Moderator
25 Year Member
 
Joined: Jul 1999
Posts: 17,262
Likes: 168
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Everyone thinks the old pony cars were all muscle cars. Most of the Camaros and Mustangs only came with straight 6's or small V8's. If the car itself is in good shape then it's worth buying just as a good foundation for a buildup. Even dropping in a good 350/350 will make it better.

The proper designation for a straight 6 is L6 not I6. I have no idea why they used L.
Reply
Old Dec 9, 2002 | 06:11 AM
  #11  
ede's Avatar
ede
TGO Supporter
 
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
how much jack does he have and how big is the fire in his pocket? i have a SBC 68ss i'd sell if the price was right, and in cash.
Reply
Old Dec 9, 2002 | 09:31 AM
  #12  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,651
Likes: 309
And another thing, that PowerGlide behind the 250 is probably an air cooled model. The beauty is that if the body is worth the price, the car was designed around a SBC engine, so other than front springs and a new drivetrain, all the shiznit is already there.
Reply
Old Dec 9, 2002 | 09:31 AM
  #13  
RB83L69's Avatar
Supreme Member
 
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
That's the kind of car everybody used to look for...

You could pick them up dirt cheap; like Stephen said, there were probably twice as many 6-cyl Mustangs and Camaros as there were V8 ones, let alone Z28s or SSs, and Mach 1s or GTs. Then a V8 was equally dirt cheap, just as it is now, so for pennies on the dollar you could clone a V8 car. Most of them got turned into 350/350 combos, lots of those that came with the old Saginaw 3-speeds still have the clutch pedal in them, or at least the stick brake pedal. Look around at a parking lot full of them at a car show or something, you'll see what I mean.

I believe that already by the mid-80s there were like 10 times as many 60s Z28 clones on the roads as actual Z28s. The ones that really used to tickle me were the 67 "RS/Z28" combos, since that didn't exist in 67; the 67 was a strictly race car, and no options beyond a heater were even available, especially such dead weight for racing features as disappeaaring headlights.
Reply
Old Dec 9, 2002 | 01:50 PM
  #14  
flyin89's Avatar
Member
iTrader: (7)
 
Joined: Aug 2002
Posts: 178
Likes: 0
If it's reasonably priced and he passes let me know every one and his brother is looking for one. As an investment its golden.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mitch_04
Members Camaros
20
Sep 20, 2021 02:24 PM
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM
Black89TA
Exterior Parts for Sale
9
Jul 23, 2016 10:42 AM
MJS422
Firebirds for Sale
31
Oct 13, 2015 03:53 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
0
Aug 6, 2015 03:51 PM




All times are GMT -5. The time now is 01:33 AM.