I am collecting ideas and planning a 350 based small block tpi motor. 350 based meaning that anythinhg built off of a 350 block including strokers. I am looking at naturally aspirated as well as supercharged, no nitrous. Please post your motor build along with gas mileage, tranny, and gearing ratio. I am interested in seeing who gets the most horses and quickest 1/4 miles with the best gas mileage. So far Mike of the 383 TPI post looks to have the best at @12.5 seconds and 21 mpg highway, 16 city.
Can you beat that?

Thanks for the info,
Mike3

 

see my post on power adders:

https://www.thirdgen.org/techbb2/sho...hreadid=144692

21 MPG, 500 horsepower.

 

Engine: '91 Vette L98, 9.6:1, HOT cam (.492/.492 lift, 218/228 duration at .050"), dual plane intake, old+untuned holley 4160

Trans: T5

Rear: Open 2.73 with street tires

1/4 mile: best time: 14.865@88, best speed: 15.4@99

mileage: 14 city, 26 highway at constant 70mph. Highway average is 22 (70-80mph and the occasional 90-95 sprint)

 

i cant get that kind of gas mileage with my 305