Cam questions?
Thread Starter
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Cam questions?
If I have this cam ( 211/225 483/520 113 sep.) will It allow me to run a more aggresive timing?
I know that I have higher comp than stock and it will affect the looks on the ignition curve but how will tha camshaft affekt my tuning?
Im tuning my 383 with 10:3 in comp. and want to know how aggresive timing I should start with. Then I'm going to add 9 psi boost and let the MSD 6BTM pull back timing...........
/N
I know that I have higher comp than stock and it will affect the looks on the ignition curve but how will tha camshaft affekt my tuning?
Im tuning my 383 with 10:3 in comp. and want to know how aggresive timing I should start with. Then I'm going to add 9 psi boost and let the MSD 6BTM pull back timing...........
/N
TGO Supporter
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
never tuned or wrencheda power adder car, but with my limited knowledge i'd say 6 to 10 base and shoot for 34 to 38 total and let msd do it's thing and retard it. you might want to repost this question on the power adder board, lot of more knowledgeable people over there.
Thread
Thread Starter
Forum
Replies
Last Post