Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

crank but no start

Thread Tools
 
Search this Thread
 
Old 07-25-2000, 10:54 PM
  #1  
Junior Member
Thread Starter
 
silvermelon's Avatar
 
Join Date: Jul 1999
Location: waldorf, md usa
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
crank but no start

my 86z28 lg4 will crank but it wont start. i pumped the gas like crazy but i didnt even smell gas. we took the fuel line off the carb thinking it was clogged and then pumped it and gas came out like crazy. it started and was fine that day, this morning i go out to start it and nothing. no smell no nothing. could this be my fuel pump or what???
Old 07-25-2000, 10:58 PM
  #2  
Banned
 
Voyager Project's Avatar
 
Join Date: Jun 2000
Location: cypress CA US
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
I had the same problem with my car. If you cleaned out the fuel line you might have gotten something loose, like other debris in the line that got stuck in the float needel. Or you may have flooded comustion chambers,and or fould plugs, because of priming it so much. But it sounds most likely like a fuel pump, if it is eletronic and you dont here it self prime as you turn the key then that is it. But if it is mecanical it might be it too ( if its mechanical you won't hear it start up obviously), it might also be a clogged filter not letting gas through.

[This message has been edited by Voyager Project (edited July 25, 2000).]
Old 07-25-2000, 11:04 PM
  #3  
Junior Member
Thread Starter
 
silvermelon's Avatar
 
Join Date: Jul 1999
Location: waldorf, md usa
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
actually we just took it off and saw gas coming out so we put it back on. it was starting fine and then it just didnt want to start. so i dont think its plugs.
Old 07-25-2000, 11:06 PM
  #4  
Moderator

 
Vader's Avatar
 
Join Date: Jan 2000
Posts: 19,365
Received 219 Likes on 179 Posts
melon,

Fuel level, fuel lines, fuel filter, pickup screen (in tank), or pump.

You may have a problem in the float/inlet needle and seat on your E4ME if the fuel pump makes pressure but there is no fuel in the bowl. If you think the float may be hanging, try the old hammer handle "tap test" on the carburetor air horn - lightly!

Later,
Vader

------------------
"Some Body...Someone"
Old 07-25-2000, 11:25 PM
  #5  
Junior Member
Thread Starter
 
silvermelon's Avatar
 
Join Date: Jul 1999
Location: waldorf, md usa
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
""You may have a problem in the float/inlet needle and seat on your E4ME if the fuel pump makes pressure but there is no fuel in the bowl. If you think the float may be hanging, try the old hammer handle "tap test" on the carburetor air horn - lightly!""

what is a E4ME? and your saying it might be a carb problem?
Old 07-25-2000, 11:30 PM
  #6  
JP84ZROC
Guest
 
Posts: n/a
if you want to know if you are getting gas into the carb, just look into the primary venturi and work the accelerator( with the engine off) you should see gas squirt out the accelerator pump nozzels. Also, remove the filter in the carb. fuel inlet it may be clogged.
Old 07-25-2000, 11:54 PM
  #7  
Junior Member
Thread Starter
 
silvermelon's Avatar
 
Join Date: Jul 1999
Location: waldorf, md usa
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
ok
whats the tap test and wheres the air horn?

[This message has been edited by silvermelon (edited July 25, 2000).]
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bryan623
TPI
7
03-22-2021 06:43 PM
Caspar
TPI
24
06-19-2016 11:19 PM
Orr89RocZ
Power Adders
206
04-25-2016 08:28 AM
Bryan F
Tech / General Engine
2
08-18-2015 02:28 PM
Winchester1094
Tech / General Engine
0
08-18-2015 10:23 AM



Quick Reply: crank but no start



All times are GMT -5. The time now is 12:17 AM.