EGR differences, Automatic vs. Manual?
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Princeton, NJ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
EGR differences, Automatic vs. Manual?
I quickly ran to the parts store looking for a generic replacement EGR, only to find after purchase it was designed for an Automatic setup. The part number of my EGR is 17085914, while this is a replacement for 1708913.
The part fits, and im not getting a code 32, but the instructions say to install an orifice washer based on which OEM EGR you had, Size 11 for the automatic, Size 25 for the Manual. Of course, washer sizes, 8, 11, 13, and 31 are provided, but 25 is not.
How different could these EGRs be, or what should I do? I havent been able to find an EGR for my manual.
1986 2.8, 5 Speed
The part fits, and im not getting a code 32, but the instructions say to install an orifice washer based on which OEM EGR you had, Size 11 for the automatic, Size 25 for the Manual. Of course, washer sizes, 8, 11, 13, and 31 are provided, but 25 is not.
How different could these EGRs be, or what should I do? I havent been able to find an EGR for my manual.
1986 2.8, 5 Speed
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM