erratic idle, runs rough, have winaldl connected - help
Thread Starter
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
erratic idle, runs rough, have winaldl connected - help
OK - new territory for me, so new thread.
Installed ported/polished #416 with 1.95 i 1.5 e valves, 1.6 rockers, LT1 cam, headers, gutted cat, carb intake, TBI adapter plate. Timing set above the marks - I think my balancer marks have slipped - set timing by greatest amount of vacuum on intake, which is 15 hg/in. Car runs rough, erratic idle and at any constant speed, jerky kinda when driving, and wants to die at stopsign. Cam installed normally (no advance), can't find any vacuum leaks, set valves with car running.
Now - have WinALDL cable and laptop, and I get readings! :lala:
Help me get her running good - what info do you want off the WinALDL?
Installed ported/polished #416 with 1.95 i 1.5 e valves, 1.6 rockers, LT1 cam, headers, gutted cat, carb intake, TBI adapter plate. Timing set above the marks - I think my balancer marks have slipped - set timing by greatest amount of vacuum on intake, which is 15 hg/in. Car runs rough, erratic idle and at any constant speed, jerky kinda when driving, and wants to die at stopsign. Cam installed normally (no advance), can't find any vacuum leaks, set valves with car running.
Now - have WinALDL cable and laptop, and I get readings! :lala:
Help me get her running good - what info do you want off the WinALDL?
Thread
Thread Starter
Forum
Replies
Last Post
