Finally got pics of my car
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 5
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
bastard j/k. I wish my car was that new. All my cars looked like theyve been through a demolition derby. One tip since you ahve t-tops. get weld in sub frame connectors. I made the mistake of not getting them and after my 350 swap my t-tops and hatch started to leak like its nobodies buisness.
Thread Starter
Member
Joined: May 2003
Posts: 283
Likes: 0
From: North Carolina
Car: 83 z28
Engine: L69
Transmission: BW t-5
How much are subframe connectors? I'm going to look into that. My cobra/mustang cousin said that the convertibles hjave chassis strengthened since its a rag top, coupes are stronger, but t-tops aren't strengthened and thats why the fox-bodies used to bend a little bit, in the frame.
Anyways, heres my interior picture. Yes it is plum filthy, but the BIG vaccuum is coming to clean house. The valvoline thing on drivers side is temporary. Oh, and please disregard that Ford pickup, thats my buddies mom who came by with the digi camera
Anyways, heres my interior picture. Yes it is plum filthy, but the BIG vaccuum is coming to clean house. The valvoline thing on drivers side is temporary. Oh, and please disregard that Ford pickup, thats my buddies mom who came by with the digi camera
Senior Member

Joined: Mar 2001
Posts: 841
Likes: 3
From: Silverhill,Al
Car: 92 Camaro RS
Engine: 305 TBI
Transmission: T-5
Actually factory T-top cars got a reinforced uni-body from everthing I have read so far, that's why all the convertibles started out as T-top cars before the conversion shop changed them over to convertibles, but still get good weld in subframes for it, it will make it hold up a lot longer, buy the way...NICE CAR
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
:hail: :hail: :hail:
Beautiful ride!!!!!
Mine had 103,000 on it when I got it for 500 bucks. 3 Years and close to 4000 bucks later, the body's still in primer, the original interior is still pretty much shot, it rattles everywhere (still have'nt installed those darn SFC's)..........I should have bought a nicer one to begin with, but the HO badges were unique and I figured for 500........ how go I go wrong???
Well, by not buying a nice one to begin with like you did first off.
Still hauls though for a 305!!! I'll get mine painted Sebring silver (Dodge color), and get the ground effects painted the same color.
Post a pic of your engine if you have one!! Esp. if it's bone stock. I could use one as a reference for where to route all the wires/hoses better!!!
My engine pic:
Beautiful ride!!!!!
Mine had 103,000 on it when I got it for 500 bucks. 3 Years and close to 4000 bucks later, the body's still in primer, the original interior is still pretty much shot, it rattles everywhere (still have'nt installed those darn SFC's)..........I should have bought a nicer one to begin with, but the HO badges were unique and I figured for 500........ how go I go wrong???
Well, by not buying a nice one to begin with like you did first off.
Still hauls though for a 305!!! I'll get mine painted Sebring silver (Dodge color), and get the ground effects painted the same color.
Post a pic of your engine if you have one!! Esp. if it's bone stock. I could use one as a reference for where to route all the wires/hoses better!!!

My engine pic:
Trending Topics
Supreme Member
iTrader: (1)
Joined: Apr 2000
Posts: 5,321
Likes: 4
From: Northern CA.
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Nice clean car
Wish my interior was that cherry looking. I got my seats all recovered but my driver seat is getting a hole again on one of the side bolsters after 2 1/2 years of use
4th gen seats here I come
4th gen seats here I come
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I'm definately not liking the fog lights, but other than that, the car is absolutely beautiful! I've always had quite a liking for the L69 5 speed cars.
Thread Starter
Member
Joined: May 2003
Posts: 283
Likes: 0
From: North Carolina
Car: 83 z28
Engine: L69
Transmission: BW t-5
Thank you for the compliments....
However, the foglights on the car were not installed by me. The previous owner (made 6 figures a year) added these. This was a special ordered z28. It was delivered to his door, not one that came out of a car lot. I'm the second owner
However, the foglights on the car were not installed by me. The previous owner (made 6 figures a year) added these. This was a special ordered z28. It was delivered to his door, not one that came out of a car lot. I'm the second owner
Thread Starter
Member
Joined: May 2003
Posts: 283
Likes: 0
From: North Carolina
Car: 83 z28
Engine: L69
Transmission: BW t-5
Post a pic of your engine if you have one!! Esp. if it's bone stock. I could use one as a reference for where to route all the wires/hoses better!!!
[/B]
[/B]
, was the engine picture I forgot. However, MAYBE I can get one soon.By the way man, I forgot to add, your motor is NICE! Good rebuild and color. All shiny too the dual snorkel cleaner...what did you use?
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Originally posted by 83 Z28 HO
By the way man, I forgot to add, your motor is NICE! Good rebuild and color. All shiny too the dual snorkel cleaner...what did you use?
By the way man, I forgot to add, your motor is NICE! Good rebuild and color. All shiny too the dual snorkel cleaner...what did you use?
So far as the air cleaner goes, I just carefully masked off the decal, buffed up the paint a bit and used some gloss black and walaa!! Luckily the decal and hoses were already in good shape on mine.
There's one guy on the board that had his chromed! Looks sweet!
I painted the engine Mopar blue (getting flame suit on), cause I think a black engine hides leaks too much.
TGO Supporter
Joined: Oct 2002
Posts: 9,067
Likes: 1
From: Saskatoon, SK, Canada
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Bitchin' car man... wish my '83 HO looked that clean 
Question: My '83s GFX badges were stolen, and I was wondering... under the plastic Z28 badge, were it says "5.0L HO" is that a sticker or what?
Oh... and did you ever find a build sheet or an RPO sheet? I'm still looking for one...
Question: My '83s GFX badges were stolen, and I was wondering... under the plastic Z28 badge, were it says "5.0L HO" is that a sticker or what?
Oh... and did you ever find a build sheet or an RPO sheet? I'm still looking for one...
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Originally posted by Air_Adam
I was wondering... under the plastic Z28 badge, were it says "5.0L HO" is that a sticker or what?
I was wondering... under the plastic Z28 badge, were it says "5.0L HO" is that a sticker or what?
Thread Starter
Member
Joined: May 2003
Posts: 283
Likes: 0
From: North Carolina
Car: 83 z28
Engine: L69
Transmission: BW t-5
Yea its just a decal thing that says 5.0L H.O., but 26 dollars?!?!??!
But I guess for them decals it has to come from the hip.
Oh and thanks for the compliments
But I guess for them decals it has to come from the hip.
Oh and thanks for the compliments
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 5
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Originally posted by 83 Z28 HO
Yea its just a decal thing that says 5.0L H.O., but 26 dollars?!?!??!
But I guess for them decals it has to come from the hip.
Oh and thanks for the compliments
Yea its just a decal thing that says 5.0L H.O., but 26 dollars?!?!??!
But I guess for them decals it has to come from the hip.
Oh and thanks for the compliments
Senior Member
Joined: Apr 2003
Posts: 737
Likes: 0
From: I said that when I was sober...ish
Car: 1985 Mustang GT
Engine: hamsters
Transmission: a hamster wheel
Wicked nice car 83 z38 HO, my first was the same but no HO and it was very ratty and beat, not that I still didnt love it
, btw is your hood fiberglass?
, btw is your hood fiberglass? Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
I believe most all the 83 Z's got the glass hoods, along with the 82 CFI's.....then they were recalled.....
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM




. But my 84 Iron Duke has 5.