My driver side axle I believe is stripped, and I need to change it. I have pulled the center cover, but I was just wondering which bolts I have to take out just to pull the axle out. I am running a power traxx locker, will I have to remove that. Any help is appreciated. THanks in advance Jason

 

remove the cross bolt then remove the pin it goes through, push axle inward and remove c clip, if it doesn't fall off, them pull axle outward. your manual ought to have pretty good pics and locations of the parts. when you have the pin out make sure it's in park or gear and don't move or other wise spin the axles or carrier. the carrier doesn't have to be removed.