idle problem
Thread Starter
Junior Member
Joined: Apr 2000
Posts: 11
Likes: 0
From: NY
Car: 1991 Z28
Engine: 5.7
Transmission: 700r4
idle problem
I replaced my stock throttle body with a Holley 52mm. I didn't have any idle problems before the swap. When I first started the car, it wouldn't hold idle. I replaced the IAC valve and the problem is still there. Any Ideas on what my problem could be? The car is a 1991 z28 350 tpi. Thanks.
Thread Starter
Junior Member
Joined: Apr 2000
Posts: 11
Likes: 0
From: NY
Car: 1991 Z28
Engine: 5.7
Transmission: 700r4
Also the idle problem seems to be when the car is cold only. When the car warms up the idle seems to be fine. Someone must have an idea........ I tried searching and found some info but more would be helpful.
Thanks.
Thanks.
TGO Supporter
Joined: Oct 2002
Posts: 9,067
Likes: 1
From: Saskatoon, SK, Canada
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Throttle linkage adjusted properly? Maybe the TPS improperly set? I don't have much experience with FI, but you didn't really say what it was doing... idleing high? stalling? idleing roughly?
Thread
Thread Starter
Forum
Replies
Last Post
