RB, look with/in rear main bearing question
Thread Starter
Member
Joined: Dec 2000
Posts: 250
Likes: 0
From: ohio'ish
RB, look with/in rear main bearing question
We were discussin my weird oil leak. Just how would i have messed up the rear main? If the rear seal was cracked, would that spray too? What physically would happen to that bearing, and wouldn't the oil just spray into the pan??? Thanks...
------------------
86 IROC-Z, Retired for winter, weird oil leak (drains out in about 3 minutes), new 355 other than that, TPI, 700R4, edelbrock headers, removed AC/Air pump, heater plate conversion - no heater (loL). 14.8@90MPH
Next project (think I'm going to scrap the IROC)- mid 80's monte carlo, 383, edelbrock performer RPM intake, cam, holley double pumper carb, sportsman 2 heads, NOS. Hoping mid/high 12's on motor, mid 11's on spray.
------------------
86 IROC-Z, Retired for winter, weird oil leak (drains out in about 3 minutes), new 355 other than that, TPI, 700R4, edelbrock headers, removed AC/Air pump, heater plate conversion - no heater (loL). 14.8@90MPH
Next project (think I'm going to scrap the IROC)- mid 80's monte carlo, 383, edelbrock performer RPM intake, cam, holley double pumper carb, sportsman 2 heads, NOS. Hoping mid/high 12's on motor, mid 11's on spray.
Thread
Thread Starter
Forum
Replies
Last Post
red90IROCls1
Transmissions and Drivetrain
10
Aug 25, 2015 06:56 AM
rsrmoore
Transmissions and Drivetrain
1
Aug 7, 2015 08:44 PM