ok setup is 350 with afr 210's will pbly be running a holley intake with a mighty demon 750 carb. The only thing i am not sure on is the cam. I want a hyd roller that will work ok NA and then be good under boost. Eventualy i am going to run a vortec SC with about 8-10 PSI. I drive this car on the street so power band is 1500-5500. Thanks guys and gals hav a happy holidays.

 

Crane cams
PowerMax
Hydraulic Roller
HR-284-2S-12 IG

Find the specs here.
Hyd roller supercharger cam

 

i have neverr delt with a crain cam how do they compair to comp

 

Let me put it this way. most of the owners of the other popular camshaft companies learned their stuff while working at or getting cam designs perfected at Crane Cams.

Many of these guys are students of Harvey Crane.

Crane cams, like Crower and Engle and Iskenderian
Cams have been around a long time.

Do a internet search for Harvey Crane.


The Hydraulic rollers from Crane cams work very well.

 

cool thanks for the new found knowlege. any one want to take a crack at what type of power this thing will make when i get it all together this summer and in the car i will be sure to post dyno results on it.