Help I need Part numbers and good web site for camaro parts
Thread Starter
Junior Member
Joined: Jan 2001
Posts: 8
Likes: 0
From: Vermilion, OH USA
Help I need Part numbers and good web site for camaro parts
I'm at work and I need a new ball joint and an idle arm for an 84 v6 camaro and possible web sites where I might purchase these. Also I don't know but is there any "performance" version of these parts if so what do readers recommend
Member
Joined: Jul 1999
Posts: 123
Likes: 0
From: Buda, TX
Moog seems to be the brand that many people like. I got all of my Moog front end parts through www.carparts.com and saved a lot of money vs. buying them locally. www.wrenchhead.com is another site that you can check on prices and part numbers.
Member
Joined: Apr 2000
Posts: 392
Likes: 0
From: lost in southern Indiana
you might check carpartsonsale.com
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's
when it warms up Edelbrock STB maybe springs
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's
when it warms up Edelbrock STB maybe springs
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
In fact if you go to http://www.yahoo.com and search for "carparts.com coupon", you can find some great online coupons for first-time buyers! I used a "$50 off $100 order" coupon.
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Supreme Member
Joined: Jul 1999
Posts: 1,431
Likes: 1
From: Huntsville, AL
Car: '00 Chevrolet Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
PST has idler arms for Camaros and they're not that expensive either, less than the dealership wants for one. Good quality product too, I've had mine for probably 10,000 miles with no problems out of it.
-Mark W.
'88 SC Camaro w/ 305 TBI
-Mark W.
'88 SC Camaro w/ 305 TBI
Senior Member
Joined: Oct 2000
Posts: 762
Likes: 0
From: Littleton, CO
Car: 1986 Iroc Camaro
Engine: 305 TPI
Transmission: Th700R4 Jr. Raptor
Hey! check out
http://www.thirdgenparts.com/
They are a online thirdgen junkyard, people are nice, prices are great!
http://www.thirdgenparts.com/
They are a online thirdgen junkyard, people are nice, prices are great!
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
