what should i expect
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 81
Likes: 0
From: mobile alabama
Car: 84 berlinetta
Engine: 305
Transmission: 700r4
what should i expect
ok what should i expect with this set-up in my 84 berlinetta 305
crane energizer cam :
intake lift- 105 duration- 204 deg.
exhaust lift- 115 duration- 204 deg.
Intake @Cam 2847 @Valve 427
Exhaust @ Cam 2847 @Valve 427
Rocker Arm Ratio 1.5
flowtech headers
custom 2 1/2 in. y-pipe no cats to a hooker cat-back
edelbrock 600
also the engine is a fresh rebuild everything else is completely stock so what should i expect
crane energizer cam :
intake lift- 105 duration- 204 deg.
exhaust lift- 115 duration- 204 deg.
Intake @Cam 2847 @Valve 427
Exhaust @ Cam 2847 @Valve 427
Rocker Arm Ratio 1.5
flowtech headers
custom 2 1/2 in. y-pipe no cats to a hooker cat-back
edelbrock 600
also the engine is a fresh rebuild everything else is completely stock so what should i expect
Last edited by 84_berly_84; Feb 21, 2004 at 01:49 PM.
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
To put it in perspective, the L69 has a cam with 203°/207° duration, .440" something lift; and a 3" Y-pipe; and about a point more compression than your LG4. Same heads. So I'd guess you'll get a little less than a L69's 190 HP. Maybe 175-180 if you're real lucky.
Thread
Thread Starter
Forum
Replies
Last Post
ZZ3Astro
Power Adders
1045
Aug 13, 2019 12:57 AM