anyone with this cam?
Thread Starter
Member
Joined: Apr 2000
Posts: 392
Likes: 0
From: lost in southern Indiana
anyone with this cam?
Comp cams 08-302-8, 480 lift 210-220 at @.500
How do you like it, this is what they suggested, just looking for opnions.
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
How do you like it, this is what they suggested, just looking for opnions.
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
If that's for the car in your sig, it should be a pretty good choice.
Get new valve springs, that much lift on the stock ones is pushing your luck.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Get new valve springs, that much lift on the stock ones is pushing your luck.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Thread Starter
Member
Joined: Apr 2000
Posts: 392
Likes: 0
From: lost in southern Indiana
I guess I should have mentioned it is going in a L-98 with the alum vette heads. I am porting the plenum, etc. and the edelbrock intake. The heads have a pocket port and 525 springs.
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
Thread Starter
Member
Joined: Apr 2000
Posts: 392
Likes: 0
From: lost in southern Indiana
this is also comparable to the ZZZ cam from GM. Anyone with some Ideas?
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
Jeremy
------------------
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works
Junior Member
Joined: Mar 2000
Posts: 16
Likes: 0
From: Waco,Texas
Jeremy I have the same cam new in box! I was going to put it in a new ZZ4. After reading the post by Kevin91 and how much he like the zz4 cam. I think I am going to Leave the ZZ4 cam in and just add 1.6 Roller rockers.
Thread
Thread Starter
Forum
Replies
Last Post