I am looking for a good head, intake and cam combo to make more power. I don't want to go aluminum, just maybe some cheap cast GM heads. I drive my car everyday and it is my only mode of transportation, but I want my ride to be a quick one. I am not worried about emmisions or gas guzzling, just reliable and fast. Any suggestions would be appreciated.

------------------
'87 Camaro Iroc-Z
'92 350 .040-over
Mild Cam
700R-4 w/shiftkit only.
Edelbrock Perf. manifold and Carb(600cfm#1406)
GM HEI upgraded with Accel parts
TBI truck Heads

 

What exhaust?

Small block power is in the heads. You have basically the worst 350 heads there are on there. Get a pair of L98 heads and a Comp XE268H cam. You definitely need to make sure that you have a good exhaust system if you haven't already, from the heads to the street.

------------------
"So many Mustangs, so little time..."
ICON Motorsports

 

My cast iron heads that have been ported and polished are for sale if you're interested. Those heads with a 270HR-10 cam on my 350 proppelled my car to mid to low 13s.

------------------
92 Z28 5.7
------------------
Trick Flow 23° heads, XR270HR-10 cam, Accel intake base + ported TPI, TES headers, Flowmaster catback, MSD ignition
#24 SVO injectors, 1LE aluminum driveshaft.


Click here to see my car at Truspeed.org
Check out Truspeed
Check out the Bin Archive