I am located in South NJ & I am the founder of the Jersey F-Body Assoc. All 'maros & trans ams/firebirds/firhawks etc are welcome to join! We are looking for new members. if you're interested plz e-mail me at verucasalt025@hotmail.com with your car info & contact info etc. or if you have AOL instant messanger my s/n is Spiderman7925
check out the site @ http://jfassoc.homestead.com/jfa.html
Thanks,
Tom---95 Z28
------------------



------------------

 

My firhawk is in the shop right now,

shucks...

------------------
89 GTA G92
305 TPI WC 5spd w/3.45
Accel Cap & 8mm Taylor's
Custom 4" Cold Air Induction
Jet Airfoil
K&N Airfilter
160 deg stat/fan switch TB Bypass - Steel Rad
Cat back 3" Exhaust w/Terminator Muff.
HiGh FlOw Dynomax Cat
Spohn LCA's - KYB GR-2's
Moroso Crank Bolt and roller pilot bearing.
New Fuel Pump!
Autometer Vac+Oil Temp
2000 Yamaha R1 150hp 385ibs

 

Hey Camarodude.... didn't you post this a couple days ago and it got locked because it was non tech?? If not, sorry. If it was, then please, stop it. Thanks

------------------
Kevin Irving
85 Trans Am WS-6, 305 TPI, custom burned '86 PROM with '87 "165"ECM, Accel Supercoil & 8.8 Wires, MSD 6AL, Aluminum Driveshaft, Wonderbar, TB Coolant Bypass, Ported Plenum, Modified MAF, Syclone Fuel Pump, JET Airfoil

15.556 @ 86.65mph, Nov 10, 2000.... I know it sucks.. but it will get better!

http://www.geocities.com/transam85tpi/

Member - The Tidewater Trans Am Club, Norfolk VA http://www.geocities.com/ttacva/

 

Yep, I was right... I knew it looked familiar.... this is about the 8th time you've posted this in other forums and this one combined.... Do you have anything constructive to offer besides begging people to join your club?? I don't mean to be mean... but this is getting kind of ridiculous isn't it?

 

Tom I think if you want to have more people involved you may want to move the meeting place towards central Jersey more. I know that the meeting point now is like 2 hrs from my house. Just a suggestion.

------------------
Riccioli Performance Motorworks

--RPM Racing--

-Currently building first ever engine. 383 with Super Ram plenum and runners, Edelbrock lower intake, Bosch 24# injectors, AFR 190 heads, MSD ignition.
-Will be installing Baer Brakes
-Will be installing full Spohn suspension in rear
-Art Carr 700R4 trans??


Attention Everyone!!! I will be changing my name on the message boards to HardcoreZ28 sometime in the near future. Just wanted to let everyone know.