Motor gurus - help id an engine block
#1
Member
Thread Starter
iTrader: (1)
Join Date: Jul 1999
Location: Tucson, Arizona
Posts: 247
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 IROC Z28
Engine: 6.0L LQ9 crate engine
Transmission: Performa Built 700R4
Axle/Gears: 3.42 10 bolt, Eaton/Moser
Motor gurus - help id an engine block
Part number 14010207 - V8 motor. What is it? 350, 305? 4 or 2 bolt main? High nickel content? Truck or car block? What era, 60s, 70s 80s??
Thanks!
------------------
Phil87IROC
Blue '87 IROC, 383 Crate Motor, KB pistons, AFR 190 heads, ZZ-9 cam, Edelbrock RPM intake, Hooker SC/LT headers, Edelbrock 750 cfm Carb (#1411), stock T-5, GM 3.42 rear w/Auburn posi.
Ohio Valley Dragstrip Trophy Bracket WINNER - 8.39 ET on a 1.82 sec. - 60'. Best MPH = 84.44. Still Tuning Carb!
Red '89 IROC L98, 700R4, T-Tops, K&Ns w/open air boxes, 160 T-stat, Hyper Chip, gutted MAF, 53kv coil, MSD wires.
Thanks!
------------------
Phil87IROC
Blue '87 IROC, 383 Crate Motor, KB pistons, AFR 190 heads, ZZ-9 cam, Edelbrock RPM intake, Hooker SC/LT headers, Edelbrock 750 cfm Carb (#1411), stock T-5, GM 3.42 rear w/Auburn posi.
Ohio Valley Dragstrip Trophy Bracket WINNER - 8.39 ET on a 1.82 sec. - 60'. Best MPH = 84.44. Still Tuning Carb!
Red '89 IROC L98, 700R4, T-Tops, K&Ns w/open air boxes, 160 T-stat, Hyper Chip, gutted MAF, 53kv coil, MSD wires.
#2
Phil,
Like I said before, check www.mortec.com. Incidentally, they say the 14010207 is a 350, 1980-85, 2 or 4 bolt mains. Pretty generic 350.
------------------
Later,
Vader
------------------
"What a Day..."
Adobe Acrobat Reader
Like I said before, check www.mortec.com. Incidentally, they say the 14010207 is a 350, 1980-85, 2 or 4 bolt mains. Pretty generic 350.
------------------
Later,
Vader
------------------
"What a Day..."
Adobe Acrobat Reader
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM