What Cam With These Mods (Confused)
Thread Starter
Supreme Member
iTrader: (8)
Joined: Jan 2000
Posts: 3,968
Likes: 1
From: Macedonia ,OH
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
What Cam With These Mods (Confused)
89 Formula 350 , TrickFlow 23* heads , Port & Polished Edelbrock Intake , AS&M Runners, Ported Plenum , TES's and Catback , 1.5 RR's I was thinking the Lunati 215* Crane 214* or can or should I go higher? Thanks
Supreme Member
Joined: Aug 1999
Posts: 1,443
Likes: 0
From: College Station, Tex USA
Car: 89rs
Engine: 400Sb
Transmission: Tremec 3550
I would try to find something a little more. Try about 220 intake at 113Lsa. What gear and converter you got?
Your going to really want something in the 520 lift range and that will be tough to find with <220.
Your going to really want something in the 520 lift range and that will be tough to find with <220.
Banned
Joined: Mar 2001
Posts: 203
Likes: 0
Well I have pretty much the same combo. My cam gets me in the mid 12s so I'm pretty happy. A different cam would probably be better though...
------------------
92 Z28 5.7
------------------
Trick Flow 23° heads, Comp Cams XR270HR-10 cam, Accel intake base + ported TPI,
TES headers, Flowmaster catback, MSD ignition, #24 SVO injectors, 1LE aluminum driveshaft.
Click here to see pics of my car !
------------------
92 Z28 5.7
------------------
Trick Flow 23° heads, Comp Cams XR270HR-10 cam, Accel intake base + ported TPI,
TES headers, Flowmaster catback, MSD ignition, #24 SVO injectors, 1LE aluminum driveshaft.
Click here to see pics of my car !
Supreme Member
Joined: Aug 1999
Posts: 1,443
Likes: 0
From: College Station, Tex USA
Car: 89rs
Engine: 400Sb
Transmission: Tremec 3550
you can probably go with the comp XE262H with no problem. 1.6s down the road would be nice. And really wake it up probably (especially with some 3.42s).
If you have any hope of getting 3.42 and a converter (or maybe 373s), the XE268H would also be real good.
Comps web page is not working. Go here http://www.compcams.com/catalog/056_057.html to see the ones above.
If you can get the roller versions of these cams
http://www.compcams.com/catalog/060_061.html
XR269HR or the XR276HR. With 1.6s on the combination you got it would scream
If you have any hope of getting 3.42 and a converter (or maybe 373s), the XE268H would also be real good.
Comps web page is not working. Go here http://www.compcams.com/catalog/056_057.html to see the ones above.
If you can get the roller versions of these cams
http://www.compcams.com/catalog/060_061.html
XR269HR or the XR276HR. With 1.6s on the combination you got it would scream
Thread
Thread Starter
Forum
Replies
Last Post
