Another timing question.
Thread Starter
Member
Joined: Jul 1999
Posts: 317
Likes: 0
From: Raytown, MO
Another timing question.
I went to time my rebuilt 305 and I have a question. I hooked up the timing light to the number 1 plug but when I shine the light the mark is about 6 inches off to the right. As I adjust it and it get closer to the timing tab it starts running worse. Do I have the distributor off a notch or something? would it run like that?
Senior Member
Joined: Aug 1999
Posts: 611
Likes: 0
From: Glendale, AZ
Like Madmax said, your balancer may have slipped. Or possibly you forgot to disconnect the distributor ecm wire.
------------------
Rob
'86 TA 305 TPI
Gutted MAF, Ported Plenum
TB Bypass, Home made Cold Air Intake,
Edelbrock T.E.S.
48psi regulator, (Nickel method)
------------------
Rob
'86 TA 305 TPI
Gutted MAF, Ported Plenum
TB Bypass, Home made Cold Air Intake,
Edelbrock T.E.S.
48psi regulator, (Nickel method)
Thread
Thread Starter
Forum
Replies
Last Post
Iroc8t8
TPI
43
Aug 26, 2015 08:14 AM