The ZL1 engine used in the 2000 camaro ZL1 concept, will it be for sale, block, heads, cam, cranks, etc.... tks

 

I think thats a 572ci in the concept.
But the 427 should be though GM.

------------------
91 B4C 305 TPI - SOON TO BE 383
TREMEC 5-SP, STOCK 1-BOLT REAREAND w/342 GEARS, K&N, AIRFOIL
EDELBROCK HEADERS, DUAL CAT TO HOMEMADE Y-PIPE & 3.5" SINGLE PIPE W/ FLOWMASTER, CRANK PULLEY, MSD, FUEL PRESS REG, COWL HOOD, WELD WHEELS
14.1@ 98MPH
-------------
OTHER RIDE
67 CAMARO - STREET CAR, BIG BLOCK, PUMP GAS
350TH w/ATI 10", 12-BOLT w/373 GEARS
10.47@129 1.55 60FT. ON MOTOR - ET-STREETs w/MUFFLERS

 

If you feel like spending a couple grand. Call MTI or ARE and ask for a 427 or 422 or all-bore 383, maybe a 360. All come with heads, cam, crank, pistons, etc, etc for the long block but i believe they are minus the induction. Might be better off calling SDPC and asking for the LS6.

------------------
89 IROC-Z 350 TPI

-Flowmaster Catback
-Performance Resource Chip
-700R4 (Rebuilt) Too much done to actually list
-K&N Airfilters
-Ported Plenum
-2.77 Gears (not much to brag about but eh, its there)
-MSD 8.5 mm plug wires
-Gutted cat
-!AIR
-Gutted Air Boxes

 

I know its 572ci, is that the size or the bore like a 350 to a 383 strocker?