Vented Gas Cap.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard.
Fram RG822 & RG823, or Stant 11822 & 11823 are the #'s that fit the filler. I don't recall which one is vented and which isn't. Says on the stock card, I believe.
Fram RG822 & RG823, or Stant 11822 & 11823 are the #'s that fit the filler. I don't recall which one is vented and which isn't. Says on the stock card, I believe.
Thread Starter
Junior Member
Joined: May 2005
Posts: 2
Likes: 0
Thank you for the welcome.
Actually I was a member a few years ago but its been a long time since I’ve been on. I wish I could remember my old user id and password but I can’t. I have since changed my email so I had to re-register.
Thanks for the part numbers. Stant part#11823 is the one that’s vented. It's $6.98 at Advance Auto Parts.
Actually I was a member a few years ago but its been a long time since I’ve been on. I wish I could remember my old user id and password but I can’t. I have since changed my email so I had to re-register.
Thanks for the part numbers. Stant part#11823 is the one that’s vented. It's $6.98 at Advance Auto Parts.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Well, then, "Welcome back"... 
I was going to guess the xxx23's were vented, but didn't go out on that limb.
I was going to guess the xxx23's were vented, but didn't go out on that limb.
Thread
Thread Starter
Forum
Replies
Last Post
