Long block or short block?
Thread Starter
Member
Joined: Apr 2001
Posts: 131
Likes: 0
From: Castlewood VA
Long block or short block?
ok...I know the basics, but i would like some real info on the difference between a long block and a short block...and is there any problem puttin a 2 bolt main motor in an 89 camaro? thanx in advance
------------------
1989 307 RS, soon to be 350.
1995 Red T-Top Camaro, 3.73 gear, F.I.P.K. K&N,Flomaster Cat-Back, Gutted Cat...Killer Stereo (Cerwin Vega and Sony Xplode)
------------------
1989 307 RS, soon to be 350.
1995 Red T-Top Camaro, 3.73 gear, F.I.P.K. K&N,Flomaster Cat-Back, Gutted Cat...Killer Stereo (Cerwin Vega and Sony Xplode)
Supreme Member
Joined: Jun 2001
Posts: 1,522
Likes: 0
From: Indianapolis IN
Long Block is the block, crank, pistons, cam, heads, valves, springs.
Short Block is the block, crank, pistons, cam.
The long and short block are almost always pre-assembled.
Yes a 2 Bolt Main will fit just fine.
The only problem you might run into is the difference between the one piece '87 and later cranks and the two piece pre '87 cranks and what flywheel/flexplate you have to run.
Short Block is the block, crank, pistons, cam.
The long and short block are almost always pre-assembled.
Yes a 2 Bolt Main will fit just fine.
The only problem you might run into is the difference between the one piece '87 and later cranks and the two piece pre '87 cranks and what flywheel/flexplate you have to run.
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
Sep 1, 2015 04:32 PM
355tpipickup
Alternative Port EFI Intakes
3
Aug 29, 2015 10:47 PM
