need some Bolt sizes (cold start inj, TPS, throttle linkage)

Reply Subscribe

Thread Tools

Search this Thread

Jun 1, 2005 | 08:21 AM

12 Sec GTA

Thread Starter

Senior Member

Joined: Jan 2002

Posts: 600

Likes: 0

From: orlando

Car: 98 Camaro SS

Engine: LS1

Transmission: M6

need some Bolt sizes (cold start inj, TPS, throttle linkage)

Im puttiny my GTA back together and I lost a few bolts... I need the sizes for:

Cold start injector bolt

TPS bolt (holds tps to TB)

Throttle bracket (holds throttle/cruise cables to plenum)

Thanks.

Jun 1, 2005 | 07:16 PM

brutalform

Supreme Member

Joined: Jul 2004

Posts: 2,387

Likes: 2

I would just check the dealer. The TPS bolts cant be had from anywhere I know of, except maybe a scrapyard. Not sure about the others though. Use a dab of antisieze on the TPS bolts. They are known for getting stripped.

Jun 3, 2005 | 01:28 AM

Jade Grey

Senior Member

iTrader: (1)

Joined: Nov 2001

Posts: 689

Likes: 1

From: Irmo, SC

Car: 1992 Pontiac GTA

Engine: 305TPI

Transmission: 700R4

Axle/Gears: 10-bolt, 2.73

The throttle bracket bolts are M6X1X13.

The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.

Cold start injector bolt? I don't have the information on that one.

HTH

Jun 3, 2005 | 02:19 PM

brutalform

Supreme Member

Joined: Jul 2004

Posts: 2,387

Likes: 2

Quote:

Originally posted by Jade Grey
The throttle bracket bolts are M6X1X13.

The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.

Cold start injector bolt? I don't have the information on that one.

HTH

[B]

Yea, that kit is what I bought a while back. It includes the TPS bolts, IAC housing bolts, and IIRC, the top "tuned port" plate bolts.