hey i looked on this site but diff people use diff gaskets i dont know which one to choose.

the person i purchased these heads from said they intake was matched to a fel pro 1205, i got that down. is there a kit i can buy with all these gaskets, or do i choose every gasket seperately it looks like it can get expensive.

i am running a 350 bored .30 over

all the gaskets i need would be:

trick flow g2 wedge aluminum head gaskets
trick flow g2 wedge aluminum headER gaskets
edelbrock elite aluminum tall valve cover gaskets
keith dorton signature series carburetor gasket (edelbrock 750cfm), i will be on a spacer to, so ill need 2.

i already know the gaskets for the keith dorton signature series are a fel pro 1205 which includes the distributor gasket.

if you can help as to which ones to exactly buy maybe i can get these purchased so i can get my motor together, please help.

 

ok i found out about the heads, would fel-pro 1010 gaskets be fine for the heads?

and what could i use for the header gaskets just standard? i found one fel-pro 1405, will this do fine?

 

noone?

 

Best bet is to find your heads on summit racing's web site, then under suggested parts, it should list your gaskets.

I don't understand why you are worked up over a carb gasket, go to the local auto parts store and buy one. Same with the valve cover gaskets... and most likely header gaskets

 

not really those, but i dont wanna buy head gaskets, then they blow and i have to get new ones and tear apart the motor again.