I just redid the intake man. gasket and now the car sounds a lot louder and sounds like it has like a hot cam or something. The engine us just a stock lo3 tbi. Could it be the timing? I might move the dist. time a little

 

Timing, a vacuum hose you forgot to plug back in, or you plain screwed up installing the intake gaskets.

 

I agree, check for vacuum leaks and set the timming.

 

It was the dist. gasket. There was a oil ring around it. Sounds a lot better now, but it still mis fires a bit. Is this the timing or something?

 

u should check the timing as soon as it is put together, the distributer, at least mine, is touchy a little bit off and it will miss, mine is at 4* adv. and it misses once in awhile, stock timing is 0*btdc. hope this helps

 

How do u guys get the dist. gasket to work? Cause i use the one in the kit and it still leaves a oil ring around it. Should i rtv it? or should i tight it more?

 

Likely a vacuum leak. Why guess? Hook up a gauge and see.

 

I know its a vacuum leak, what am going to hook the guage up to, and y is it? Also I went to white hen today and i stop and when i came out and tried to started again it won't start. How to i do timing? Do i need to disconnect something?