hi guys, could you guys give me a ruff estimate on how much hp my motor should be or putting out. mods below

1. 305 roller bored .20 over
2. crane roller cam .452/.465 .112 sep
3. double roller chain
4. world products S/R Torquer 305 Heads
5. edelbrock performer manifold
6. stock rochester carb with air plate adj.
7. hypertech power chip /160 degree thermo
8. high output mallory coil
9. headman coated 1 5/8 shorty headers
10. edelbrock rpm series 3" cat back
11. gutted catalytic converter
12. no emission equipment.
13. underdrive pulleys
14. h.o dual snorkel air cleaner with k&n
15. 5 speed / 3.23 posi

thanx guys

 

300 to 325 hp at the flywheel.

 

about 300 (+/- 5 percent)

 

Yep, I'd be inclined to agree, around 300 Horses at the flywheel.
-Rich-