Afr 195cc heads with 1.6 pro mag roller rockers
750 carb
rpm air-gap intake maybe
11:1 or 12:1 compretion
Stock bore and stroke
T56
3:42 posi
headers and exhaust
Going to go with an electric water pump if that will save some #'s.

I'm shooting for low 12's high 11's. I can't really find a bigger hydr roller then this xe282hr for sbc 350. I'm going to go with a high rev kit as well as a safe. What do you guys think?

I was thinking about going with the Xe282Hr from comp here's the specs, thing is i'll probably have to call afr and ask them what spring of theirs to run cause the spring comp calls for is like 1.430 o.d and the afr's spring pockets are cut at 1.450. So the springs that comp call for are useless.

http://www.compcams.com/Technical/Se...umber=08-432-8