Cam, head, and intake combo ???
Thread Starter
Member
Joined: Oct 1999
Posts: 427
Likes: 0
From: Chico, CA
Cam, head, and intake combo ???
Ok, I want to buy the cam and heads soon and match them to an intake to get down the road.
I have never done this and have no idea even how to.
I have pretty much decided to copy someone who has a good setup.
So....what have you got and how did it work?
Numbers are good.
------------------
Tim Currie
1988 Iroc-Z
-350
-T-Tops
-'Free' Mods
The Score 12/1 and 1 Tie
14.76 @ 91 mph (you figure it out?)
AIM TCurrie1
ICQ 67616089
"Steer with the rear wheels"
I have never done this and have no idea even how to.
I have pretty much decided to copy someone who has a good setup.
So....what have you got and how did it work?
Numbers are good.
------------------
Tim Currie
1988 Iroc-Z
-350
-T-Tops
-'Free' Mods
The Score 12/1 and 1 Tie
14.76 @ 91 mph (you figure it out?)
AIM TCurrie1
ICQ 67616089
"Steer with the rear wheels"
Supreme Member
Joined: Mar 2001
Posts: 2,047
Likes: 0
From: The State of Hockey
Car: 1987 Trans Am GTA
Engine: Miniram'd 383, 24X LS1 PCM
Transmission: TH700R4, 4200 stall
Axle/Gears: 9", 4.33:1
Well we really need a lot more info on what you have in mind for this setup, like mtx28 said. But if you want to look over my setup, you can at my website.
------------------
1987 GTA L98 MD8
355, TFS Heads, LT4 Hot Cam
My GTA
The Minnesota F-body Club
------------------
1987 GTA L98 MD8
355, TFS Heads, LT4 Hot Cam
My GTA
The Minnesota F-body Club
Thread Starter
Member
Joined: Oct 1999
Posts: 427
Likes: 0
From: Chico, CA
Ok...
At first I had planned on about $1,500 for heads and cam, and then save for an intake a little down the road. But now that I am seeing the nice heads are kinda expensive I guess I could go $2000 for heads and cam. And again, save for the intake.
I'd like (obviously) to get a combo that will give me the greatest horsepower I can.
I'd like to do the cam, heads, and intake and get the car tuned and leave it at that until I need a new motor.
I noticed that "Traxxion" seems to have a very good setup. Running mid to low 12's with AFR heads, cam, and mini-ram on a stock L98.
Anyhow, I wont be doing it by myself, I'll have help.
At first I had planned on about $1,500 for heads and cam, and then save for an intake a little down the road. But now that I am seeing the nice heads are kinda expensive I guess I could go $2000 for heads and cam. And again, save for the intake.
I'd like (obviously) to get a combo that will give me the greatest horsepower I can.
I'd like to do the cam, heads, and intake and get the car tuned and leave it at that until I need a new motor.
I noticed that "Traxxion" seems to have a very good setup. Running mid to low 12's with AFR heads, cam, and mini-ram on a stock L98.
Anyhow, I wont be doing it by myself, I'll have help.
Senior Member
Joined: Jan 2000
Posts: 634
Likes: 0
From: Essex, Ontario, Canada
Actually Trax went mid 12's with the AFR's, comp cams 218/224 and the long runner setup.
With the miniram and larger cam I believe he is now closer to 11's.
I am going to go with that cam but will probably try TFS 23* heads to save a little money. Oh, you will need to do some tuning also.
Bob
------------------
350 TPI, 700R4(rebuilt), K&N's, MSD 6AL, Headers, Flowmaster, 160* stat, airfoil, MAF screens cut out. 13.88 @ 101.18 mph
With the miniram and larger cam I believe he is now closer to 11's.
I am going to go with that cam but will probably try TFS 23* heads to save a little money. Oh, you will need to do some tuning also.
Bob
------------------
350 TPI, 700R4(rebuilt), K&N's, MSD 6AL, Headers, Flowmaster, 160* stat, airfoil, MAF screens cut out. 13.88 @ 101.18 mph
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
